Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
BMW ISTA/D Rheingold 3.42.40 ISTA/P 2.52.40 Asus F3 HDD image
06-06-2014, 02:52 AM,
Post: #71
|
|||
|
|||
RE: BMW ISTA/D Rheingold 3.42.40 ISTA/P 2.52.40 Asus F3 HDD image
(05-06-2014, 15:53 PM)petkowo Wrote:(04-06-2014, 16:42 PM)megasosio Wrote: To remove password in xp use hirens boot cd and xp pass breaker. hal error is usually caused by a boot.ini problem. Did you also select "restore mbr" when you restored the image? try repairing the system files using the xp cd or "ERD commander" boot cd. Here's more info that may help: http://support.microsoft.com/kb/330184 |
|||
07-06-2014, 14:52 PM,
Post: #72
|
|||
|
|||
RE: BMW ISTA/D Rheingold 3.42.40 ISTA/P 2.52.40 Asus F3 HDD image
I got today my ICOM A2. How i can check and make sure at network settings are ok? There was red notifications when starting ISTA, but after few minutes its gone. So it done configuration correct?
Need to update firmware, but how? How to login ICOM, do i need put static network -settings to pc? What IP should use? I tool Radar cannot find any IP. Was I helpful? Please support my time and Hit And -button's. NEW Trasdata 9 Master support Bosch SM(service mode) etc |
|||
07-06-2014, 14:59 PM,
Post: #73
|
|||
|
|||
RE: BMW ISTA/D Rheingold 3.42.40 ISTA/P 2.52.40 Asus F3 HDD image
(07-06-2014, 14:52 PM)Bimmeristi Wrote: I got today my ICOM A2. How i can check and make sure at network settings are ok? There was red notifications when starting ISTA, but after few minutes its gone. So it done configuration correct? use itool radar to get ip address of your icom. then use internet explorer to log into your icom (see post #17 in the thread below for more help): http://garage-automotive.com/showthread....583&page=2 |
|||
07-06-2014, 15:08 PM,
Post: #74
|
|||
|
|||
RE: BMW ISTA/D Rheingold 3.42.40 ISTA/P 2.52.40 Asus F3 HDD image
(07-06-2014, 14:59 PM)beemerboy88 Wrote:(07-06-2014, 14:52 PM)Bimmeristi Wrote: I got today my ICOM A2. How i can check and make sure at network settings are ok? There was red notifications when starting ISTA, but after few minutes its gone. So it done configuration correct? itool radar cannot find any IP, i don't know why and what should to do for fix? EDIT: I just connected +12V and - to ICOM, not connected to car. Is that nessessary? EDIT2: In ediabas.ini have remotehost IP:172.26.169.196 and interface:OMITEC. Is those correct? EDIT3: I change IP and interface. Maybe firmware update needs also another wires to connect. Need to connect to car some day. I tried login to ICOM, but found just this: Was I helpful? Please support my time and Hit And -button's. NEW Trasdata 9 Master support Bosch SM(service mode) etc |
|||
07-06-2014, 18:21 PM,
Post: #75
|
|||
|
|||
RE: BMW ISTA/D Rheingold 3.42.40 ISTA/P 2.52.40 Asus F3 HDD image
I am having trouble getting this to work with an OEM ICOM a2. I created the four XML files with my icom's serial number in the filename and my serial / MAC / IP in the appropriate places in the files. ISTA sees the icom, but when I try to read the car I get an error that says "Reconnecting to the same vehicle wasn't possible. The newly identified vehcile is a different one. Please reconnect to the same vehicle.". The spelling error (vehcile) appears on the dialog just as I've quoted it.
Any idea what is causing this and how to fix it? I am pretty sure the firmware is up to date because I don't get a prompt to update it when I connect this ICOM to a paid subscription version of ISTA. This ICOM works fine with ISTA on the paid subscription machine. |
|||
07-06-2014, 19:01 PM,
Post: #76
|
|||
|
|||
RE: BMW ISTA/D Rheingold 3.42.40 ISTA/P 2.52.40 Asus F3 HDD image
(07-06-2014, 15:08 PM)Bimmeristi Wrote:(07-06-2014, 14:59 PM)beemerboy88 Wrote:(07-06-2014, 14:52 PM)Bimmeristi Wrote: I got today my ICOM A2. How i can check and make sure at network settings are ok? There was red notifications when starting ISTA, but after few minutes its gone. So it done configuration correct? leave ediabas as it is disable firewall connect icom to car obd port & lan. wait 2 minutes now connect to icom in web browser. if itools radar wont work try: http://169.254.92.38:60080 or http://169.254.33.45:60080 User: root Password: NZY1150263 |
|||
07-06-2014, 19:05 PM,
Post: #77
|
|||
|
|||
RE: BMW ISTA/D Rheingold 3.42.40 ISTA/P 2.52.40 Asus F3 HDD image
I used original ICOM is working fine with ISTA/D and P. After the ICOM MAC address is added and this what I did with the steps below.
1. Select the WRENCH 2. Select the VCI Config 3. Select HO-ICOM / ENET local network or HO-ICOM / ENET direct connection, either one is worked. Hope this help, |
|||
07-06-2014, 20:44 PM,
Post: #78
|
|||
|
|||
RE: BMW ISTA/D Rheingold 3.42.40 ISTA/P 2.52.40 Asus F3 HDD image
All problems solved and firmware updated w/o car. Thanks to all for supporting.
Was I helpful? Please support my time and Hit And -button's. NEW Trasdata 9 Master support Bosch SM(service mode) etc |
|||
08-06-2014, 11:31 AM,
Post: #79
|
|||
|
|||
RE: BMW ISTA/D Rheingold 3.42.40 ISTA/P 2.52.40 Asus F3 HDD image
Bmw cas 3 mit ista/p und icom gehet kaput.Wo ist der Fehler?
|
|||
09-06-2014, 11:49 AM,
Post: #80
|
|||
|
|||
RE: BMW ISTA/D Rheingold 3.42.40 ISTA/P 2.52.40 Asus F3 HDD image
I have the image of BMW ISTA / D Rheingold 3:42:40 ISTA / P 2:52:40 Asus F3 HDD loaded and unzipped me. With Acronis I have the image then to the hard drive. If I then re-boats is Windows XP and the white loading bar. Then comes a blue screen and it starts again.
I have a laptop HP 8530w Is there a solution? |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
4 Guest(s)
4 Guest(s)
Return to TopReturn to Content