[adriansimo]

Hello all,

This device would work with passtrough?

https://www.aliexpress.com/item/13861272...34e520d898

Thank you.

[PPP007]

Xentry Passthru 12/2018 with VAS 5054A
Hangs over and over again only helps quit program and restart.
At the next start I will continue.
Is there a solution (fix)?
Thank you
PPP007

[bighomer46]

Hello,
I have a problem with passthru bosch kts 520
It finds the ecus but when you go to read any of them i get this error

Could someone throw some light on the subject

Thanks
David

[Moldovan1]

Vas5054 all ok on w204 + vediamo is working.

Hi! What version of Vediamo are you use? If VAS5054 work with Vediamo it is a great news!

[semihovic]

Hey Guys,

I've bought a VXDIAG C6, however, I'm wondering which xentry I need. I do not see the vxdiag on the list for passtru. So I'm assuming I need the other one.

Also, am I able to do some coding on my CLS (C257 ) from 2018 by offline coding?

Thanks in advance!

[pesona]

@semihovi
based on its name (i.e c6), probably you can use regular xdos.
offline coding for xentry car, you have to install either xentry special function calculator for xentry or vediamo.
is it work? try and give feedback for us to know.

here is a member that have tried vxdiag C6

https://cartechnology.co.uk/showthread.p...#pid456724

good luck

[semihovic]

@semihovi
based on its name (i.e c6), probably you can use regular xdos.
offline coding for xentry car, you have to install either xentry special function calculator for xentry or vediamo.
is it work? try and give feedback for us to know.

here is a member that have tried vxdiag C6

https://cartechnology.co.uk/showthread.p...#pid456724

good luck

Thanks Persona, i'll give it a shot tomorrow. I already had the passtru installed, so i'll try that one first.

Unfortunatly I do not have the special function calculator (or the one I have doesn't work). Do I need the latest version of Vediamo? I have 5.00.05

[ross2018]

No, you need 4.2.2

[semihovic]

No, you need 4.2.2

From what I see, is C257 not supported in 4.2.2. I may be wrong,  but do I need like updated VediamoData with 4.2.2 to make it work on a c257?

[tooltoauto]

than you for your help!