Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
vw transporter t5 2008 instrument cluster retrofit?
25-09-2019, 22:25 PM,
Post: #11
|
|||
|
|||
RE: vw transporter t5 2008 instrument cluster retrofit?
(25-09-2019, 05:16 AM)mattdj Wrote:(22-09-2019, 18:22 PM)cristo_844 Wrote:(22-09-2019, 12:53 PM)mattdj Wrote:(20-09-2019, 05:04 AM)Mex165 Wrote: Is it possible to retrofit a 2010 white cluster in the 2008 transporter? i alredy made te adapter and swapd the abs pump! (1K0907379BL) also swap the can gateway (7N0907530J) and bought nem transponders id 48! my doubts is in the immo data...its just copy the informaçion...vin,serial number,cs,mac,power class, pin and program new transponder?? or tho i have to change something else in the eeprom file?? |
|||
26-09-2019, 05:45 AM,
Post: #12
|
|||
|
|||
RE: vw transporter t5 2008 instrument cluster retrofit?
(25-09-2019, 22:25 PM)cristo_844 Wrote:Only the Blank Transponder will be programmed with FVDI(25-09-2019, 05:16 AM)mattdj Wrote:(22-09-2019, 18:22 PM)cristo_844 Wrote:(22-09-2019, 12:53 PM)mattdj Wrote:(20-09-2019, 05:04 AM)Mex165 Wrote: Is it possible to retrofit a 2010 white cluster in the 2008 transporter? But you want install Color or Color 3D? If I have been useful, leave a thank you
|
|||
26-09-2019, 08:21 AM,
(This post was last modified: 26-09-2019, 14:02 PM by Clusters.)
Post: #13
|
|||
|
|||
RE: vw transporter t5 2008 instrument cluster retrofit?
(20-09-2019, 05:04 AM)Mex165 Wrote: Is it possible to retrofit a 2010 white cluster in the 2008 transporter? 2008 T5 is based on Golf mk4 platform CAN BUS is TP 1.6 CAN gateway is located inside the dashpod Diagnostic is done through K line 2010 on Transporter Is based on MK5 Golf CANBUS is TP2.0 Seperate CAN Gateway Diagnostic done through CANBUS You can get convertors (To fit a TP2.0 radio into a TP1.6 Van) EG RNS 510 into Early T5 but not sure they will work for dash CanShack used to sell them (But don't seem to be around any more) |
|||
27-09-2019, 21:56 PM,
Post: #14
|
|||
|
|||
RE: vw transporter t5 2008 instrument cluster retrofit?
(26-09-2019, 05:45 AM)mattdj Wrote:(25-09-2019, 22:25 PM)cristo_844 Wrote:Only the Blank Transponder will be programmed with FVDI(25-09-2019, 05:16 AM)mattdj Wrote:(22-09-2019, 18:22 PM)cristo_844 Wrote:(22-09-2019, 12:53 PM)mattdj Wrote: Yes i have installed in my Golf 5 2007 premium cluster of scirocco 2011 hardware for programing the transponder and reading the immo data is not a problem... its a regular Color! |
|||
28-09-2019, 15:37 PM,
Post: #15
|
|||
|
|||
RE: vw transporter t5 2008 instrument cluster retrofit?
(27-09-2019, 21:56 PM)cristo_844 Wrote:It's very simple to install it if you have programmer and trasponder.(26-09-2019, 05:45 AM)mattdj Wrote:(25-09-2019, 22:25 PM)cristo_844 Wrote:Only the Blank Transponder will be programmed with FVDI(25-09-2019, 05:16 AM)mattdj Wrote:(22-09-2019, 18:22 PM)cristo_844 Wrote: i'm trying to do the same in my Golf 5, can you share more info? But you have installed also BCM from golf 6? If I have been useful, leave a thank you
|
|||
28-09-2019, 21:57 PM,
Post: #16
|
|||
|
|||
RE: vw transporter t5 2008 instrument cluster retrofit?
(28-09-2019, 15:37 PM)mattdj Wrote:(27-09-2019, 21:56 PM)cristo_844 Wrote:It's very simple to install it if you have programmer and trasponder.(26-09-2019, 05:45 AM)mattdj Wrote:(25-09-2019, 22:25 PM)cristo_844 Wrote:Only the Blank Transponder will be programmed with FVDI(25-09-2019, 05:16 AM)mattdj Wrote: You have checked if your ABS controller it's supported?Same for Can-Gateway. its very simple but you still not respond to my questions about the immo data! i'll try to swap the cecm for a bcm if a can swap the cluster... if i guet to that point i hill shapp the entire cable loom for one off a golf 6...im not going to hack up the lome off my car! |
|||
29-09-2019, 06:22 AM,
Post: #17
|
|||
|
|||
RE: vw transporter t5 2008 instrument cluster retrofit?
(28-09-2019, 21:57 PM)cristo_844 Wrote:From your old cluster you have to copy:(28-09-2019, 15:37 PM)mattdj Wrote:(27-09-2019, 21:56 PM)cristo_844 Wrote:It's very simple to install it if you have programmer and trasponder.(26-09-2019, 05:45 AM)mattdj Wrote:(25-09-2019, 22:25 PM)cristo_844 Wrote: i alredy made te adapter and swapd the abs pump! (1K0907379BL)Only the Blank Transponder will be programmed with FVDI CS,MAC,VIN,PIN,Power Class Be very careful on the CS because old cluster have only 7 bit the new have 12 If I have been useful, leave a thank you
|
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
3 Guest(s)
3 Guest(s)
Return to TopReturn to Content