[rehatflogs]

here write eprom

Thankyou for the fast reply !

Do we not need to mod the flash file too?

Both Original and Donor ECU are running different software versions and engine maps so would like to use the Original flash?

Thanks

ideally you should select an ecu with the same HW and SW ....

clone is done by eprom only these ecu have OTP sector so dont go swapping files about

Hi RB

Tried the file, the car started but wasn't running right
Not sure if because the SW flash was wrong or if the donor ECU had a problem (had some corroded pins)

Therefore Ive sourced another Donor ECU, this time with the correct SW !

Please could you resend a fixed Eeprom file to try out? Hopefully this should work

Many thanks!

[ROD-BENDERS]

here write eprom

Thankyou for the fast reply !

Do we not need to mod the flash file too?

Both Original and Donor ECU are running different software versions and engine maps so would like to use the Original flash?

Thanks

ideally you should select an ecu with the same HW and SW ....

clone is done by eprom only these ecu have OTP sector so dont go swapping files about

Hi RB

Tried the file, the car started but wasn't running right
Not sure if because the SW flash was wrong or if the donor ECU had a problem (had some corroded pins)

Therefore Ive sourced another Donor ECU, this time with the correct SW !

Please could you resend a fixed Eeprom file to try out? Hopefully this should work

Many thanks!

here is your FIX

br

rb