[hayk57]

Hello guys,

I have a F36 with HU_NBT2 and blue screen. Someone tried to flash it and bricked the NBT. 

I tried to flash again using esys (with icom and enet) but I always have a fatal error:

Code:

<[HU_NBT2 - 63 - btld_00001ffd-007_037_001] Transaction type: blFlash;  Message: 1% progress on ECUId:HU_NBT2_0x63 [93% of btld_00001ffd-007_037_001] [TRANSACTION]>

<[HU_NBT2 - 63 - btld_00001ffd-007_037_001] Transaction type: blFlash;  Message: 1% progress on ECUId:HU_NBT2_0x63 [96% of btld_00001ffd-007_037_001] [TRANSACTION]>
<[HU_NBT2 - 63 - btld_00001ffd-007_037_001] Transaction type: blFlash;  Message: 1% progress on ECUId:HU_NBT2_0x63 [100% of btld_00001ffd-007_037_001] [TRANSACTION]>
<MCDDiagService<id=59200, job=com.bmw.psdz.jobs.uds.MCD3_PerformECUFlashBL, service=RC_CM_ICV - RoutineControl CheckMemory IndicatedCheckValue, description=error: positive response with negative content, link=HU_NBT2_63_ETHERNET_63> [DIAGSERVICE]>
<[HU_NBT2 - 63 - btld_00001ffd-007_037_001] Transaction type: blFlash;  Message: 1% progress on ECUId:HU_NBT2_0x63 [100% of btld_00001ffd-007_037_001] [TRANSACTION]>
<[] job failed with negative response error: 
 code: repeat job
 description: service RoutineControl CheckMemory IndicatedCheckValue returned unexpected result: debugInformation_02_FF; LinkName: HU_NBT2_63_ETHERNET_63
 severity: FATAL ERROR
 [THROWABLE]>

btld flash won't suceed, does anyone have a solution for this.

Here are the logs file from esys

Thanks

[mbm1703]

Hello , are you using launcher to flash the nbt ? how u're connected ? vin / gateway/ icom ?

[hayk57]

I am using launcher to flash yes, I tried both connection icom and via vin

I am using esys 3.34 with launcher pro 3.7.0

[mbm1703]

you should not flash with launcher !!! contact me via pm )) can have a look

[Ibrahim24]

Use Esys instead of Launcher.

[laquangksxd]

you need to fix it with tool32 then flash it again.

[hayk57]

I have the exact same error without Launcher, how to fix with tool32?

[TurboDriver]

you need to fix it with tool32 then flash it again.

How to fix this with Tool32?

[mbm1703]

V850 ( dev_uds prg ) this will clear swfl,cafd,ibad and leave you with btld and hwel. Then you can recalculate tal and re flash the nbt.

[BugFix]

V850 ( dev_uds prg ) this will clear swfl,cafd,ibad and leave you with btld and hwel. Then you can recalculate tal and re flash the nbt.

It is wrong way
it won't help