[Tadk]

Update_ODIS-Service_7.2.1-EU_Postsetup_70201.101.1650_test ( 17,25 Gb )


Update 70201.101.1600-to-70201.101.1650 ( 1,38 Gb )

TEST! No guarantee!

For those who have experience and ability please check it by working on real cars and please write if you find errors or not.
This is not an official postsetup, so you use it on your own risk.
Corrected to work with Softing 505x interfaces under Service 7.2.1 and updates are from version 9.1.0, Postsetup 90100.207.530.

Don't spam thread and PM (Private Message) me for password.


Patch update for 7.2.1 (no problems with log saving):
https://cartechnology.co.uk/showthread.php?tid=58980


Before you start installing Odis from 5054 on Windows 10, you need to do the following:

1) install PDF viewer

2) enable: control panel - uninstall or change a program - enable or disable Windows features -.Net Framework 3.5

3) install font Arialuni

4) installed Visual C++

5) using file bat., install version 6.2.0 with the choice of 5054, then specify the postsetup from version 7.2.1
Attention: if you have installed or are going to install engineering,
then you need to comment out the program folder during the installation
of programs or updates: Program Files (x86)\
##Offboard_Diagnostic_Information_System_Engineering
If after updating or installing a folder with the same name as the commented one appears,
then you need to delete it.
For example: if you install or update the service, then comment out the engineering,
if you install or update the engineering, then comment out the service.

6) The installation file of the program and the bat. file must be in the same folder.

For example Service, desktop location:
Run command prompt as administrator:
cd \Users\username\Desktop
run.bat OffboardDiagSetup-Service_VWMCD_6_2_0-0103_8.exe

For example Engineering, desktop location:
Run command prompt as administrator:
cd \Users\username\Desktop
run.bat OffboardDiagSetup-Engineering_12_1_1-0102_2.exe

[anjozeron]

Jetta 2013 ok online fail login

[cicoe]

Tested on golf 2018 and TT 2015, all ok

[pendragon1]

1650 Tested with a SEAT Leon all works fine
many thanks to Tadk!!

[hestech]

1600 worked OK with A4 2018

[vagvag]

With PS 1600 and VW Touran 2016 1.6 TDI Bluemotion all ok.........
Thank you Tadk m8 as always for your value help and support!!!!!!
Regarts........

[vladim]

1590 test with Skoda Octavia 2015 F 1,6 all OK

[Venigo^]

Till 1590 all oke. Polo 2020 = Good. T-Cross 2019 = Good. Golf 2021 = Good.. Will test soon latest Post-Setup

[MCHSIEH]

1650 test Skoda kodiaq 2018 test OK!

[Tadk]

Update_ODIS-Service_7.2.1-EU_Postsetup_70201.101.1660_test ( 17,29 Gb )


Update 70201.101.1650-to-70201.101.1660 ( 65,4 Mb )

TEST! No guarantee!

For those who have experience and ability please check it by working on real cars and please write if you find errors or not.
This is not an official postsetup, so you use it on your own risk.
Corrected to work with Softing 505x interfaces under Service 7.2.1 and updates are from version 9.1.0, Postsetup 90100.207.540.

Don't spam thread and PM (Private Message) me for password.


Patch update for 7.2.1 (no problems with log saving):
https://cartechnology.co.uk/showthread.php?tid=58980

Before you start installing Odis from 5054 on Windows 10, you need to do the following:

1) install PDF viewer

2) enable: control panel - uninstall or change a program - enable or disable Windows features -.Net Framework 3.5

3) install font Arialuni

4) installed Visual C++

5) using file bat., install version 6.2.0 with the choice of 5054, then specify the postsetup from version 7.2.1
Attention: if you have installed or are going to install engineering,
then you need to comment out the program folder during the installation
of programs or updates: Program Files (x86)\
##Offboard_Diagnostic_Information_System_Engineering
If after updating or installing a folder with the same name as the commented one appears,
then you need to delete it.
For example: if you install or update the service, then comment out the engineering,
if you install or update the engineering, then comment out the service.

6) The installation file of the program and the bat. file must be in the same folder.

For example Service, desktop location:
Run command prompt as administrator:
cd \Users\username\Desktop
run.bat OffboardDiagSetup-Service_VWMCD_6_2_0-0103_8.exe

For example Engineering, desktop location:
Run command prompt as administrator:
cd \Users\username\Desktop
run.bat OffboardDiagSetup-Engineering_12_1_1-0102_2.exe