Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Solved ✔ FORD TRANSIT SID208 limp mode
01-08-2022, 14:33 PM,
Post: #1
|
|||
|
|||
FORD TRANSIT SID208 limp mode
I have a ford transit with ecu sid208.
I used dpf delete software to delete the dpf. Got the dpf removed as well. took all the dpf wires off. 1- The one just after turbo on exhause 2- one before dpf 3- one after dpf 4- the on dpf injection pump( used for regen) now problem is vehicle goes into limp mode after driving it for few seconds. but there is no lights on dash. while its running if i quckly switch it off and on again it works fine for few minutes and goes into limp mode again. ( less power, little pickup. about 70% only) today when it went for mot it failed on smoke. so i told the mot tester to restart the van. when he restarted and tested it passed. so the limp mode is also causing heavy smoke. please help. i have attached orignal ecu file and dpf delete file. please check if you can remove the limp mode entirely from ecu. many thanks |