[Tomey]

I was able to run 2510 perfectly in my '16 Volkswagen Golf 7 Rlin, no problem with coding and unprotecting!

[Jacce75]

2510 tested on
- SKODA OCTAVIA (5E3) 1.4 TSI 2014 CHPA, all OK.

[rs@chip]

here also my 2 cents..

many mqb cars tested perfectly.. online and offline, new AUDI A6 2022 reset CP on many modules , recode hole car , 48v batery register all modules visible no problem at all..but there are some like AUDI A6 C7 gw , bcm1, door modules are not respond and canot be identified..exact same also TRANSPORTER T6 2019 bcm + gw canot id..

[paskuale]

here also my 2 cents..

many mqb cars tested perfectly.. online and offline, new AUDI A6 2022 reset CP on many modules , recode hole car , 48v batery register all modules visible no problem at all..but there are some like AUDI A6 C7 gw , bcm1, door modules are not respond and canot be identified..exact same also TRANSPORTER T6 2019 bcm + gw canot id..

Yesterday I had the same problem on Audi A6 C7 year 2019.
Not have communication with 05-09-46 and doors modules (comfort can).
First I tried with update (from 1850 to 2510) and this not solve the problem.
The solution was replace “Softing” folder in C:\Program Files(x86).
Use a folder from 7.2.1 installation topic and you will solve the problem!

Today tested 2510 online with A6 4G 2019 and it is perfect!
Thank you Mr. Tadk!

[jo27hn]

here also my 2 cents..

many mqb cars tested perfectly.. online and offline, new AUDI A6 2022 reset CP on many modules , recode hole car , 48v batery register all modules visible no problem at all..but there are some like AUDI A6 C7 gw , bcm1, door modules are not respond and canot be identified..exact same also TRANSPORTER T6 2019 bcm + gw canot id..

Test this :
ODIS-Service 7.2.1 Postsetup 2560 (test) (cartechnology.co.uk)

---

test 2310 vas5054a
Golf 7 2019 all  ok

[greenhorn]

tested 2560 vw37x.....all works great!

[CenturionM]

I don't know what happened but after reinstalling the system I can't pair the 5054a, there is a problem with the connection, I don't want to work with Softing and with Odis 7.2.1 Software

do i need to install odis s 6.2.0 first, remove and install odis s 7.2.1 ?

[Jacce75]

2560 tested on
- AUDI A4 (8K2, B8) 2.0 TFSI quattro 2013 CDNC, all OK.

[seam2]

2510 tested on

- SKODA KODIAQ FL 1.5 TSI 2022 DPCA
- Kodiaq FL Led Matrix Basic Settings and Calibration which is impossible with postsetup 720, is successfully completed with 2510.
- all OK. Thanks...

[Tadk]

I don't know what happened but after reinstalling the system I can't pair the 5054a, there is a problem with the connection, I don't want to work with Softing and with Odis 7.2.1 Software

do i need to install odis s 6.2.0 first, remove and install odis s 7.2.1 ?

you need to first clean the system from previous installations, install the necessary components if necessary, then when installing version 6.2.0, select 5054 and specify the postsetup from version 7.2.1