[mgs41987]

hi guys, having lots of issues with a caddy i not long got, its had a pd130 engine put in it, runs terrible camshafts was worn etc so i have been through everything and it still does not run correct. 

timing belt done
torsion values are now at -0.5
lashes done 
brand new pd105 turbo
good pd105 injectors (had pd130 injectors before)

if anybody can give me an original file and tweak if needed for the pd130 engine with egr off i would be very grateful

bosh hardware:0281011882
vw software: 03g906016dm 6045
edc16

03G906016DM-ori.rar
File Type:
Downloaded:	8 times
Size:	248.2 KB

[al70]

have a look here, maybe useful
https://cartechnology.co.uk/showthread.p...016dm+6045

[mgs41987]

have a look here, maybe useful
https://cartechnology.co.uk/showthread.p...016dm+6045

Would I be able to just put that file into n with out any issues ?

[al70]

i'm not sure MGS, someone else will verify

[mgs41987]

Thanks for your help bud hopefully someone can help point me in the right direction

[al70]

sometimes it's not a good idea to write a file from another car by obd, even if matching numbers, things can go wrong easy, if you have ktag, open ecu and take a full bdm read, it's much safer to work by bdm on these old edc16s, then you can find ori bdm read for your ecu

[mgs41987]

Unfortunately I don’t have a ktag anymore

[al70]

is the ori file from tom-sam post the same as yours ?

[mgs41987]

i'm not sure MGS, someone else will verify

is the ori file from tom-sam post the same as yours ?

The Bosch hardware number is the same and the vw software number is the same, the software number i don’t know without installing winols and checking

[foulou0238]

hello 
here your original file 

test and reports 
ps: best way is to write it in bench

regards