[Alpha9098]

Postsetup 2510  with VAS5054A.
Audi A3 2015  Diag, and online job  to remove component protection  are  all OK.
Thanks!

[jinyouZ]

Sagitar 1.5T 2023 Service 2610 Test OK

[Jacce75]

2610 tested on
- SKODA OCTAVIA (5E3) 1.4 TSI 2014 CHPA, all OK.

[vagvag]

With PS 2610 and with VW Golf 2015 1.6 TDI all ok.........
Thank you Tadk m8 as always for your value help and support!!!!!!
Regarts........

[billyleon]

Hi to all again!!!   with AUDI CBZA 1.2 ALL OK!!!

[Jacce75]

2610 tested on

- VW TRANSPORTER V Multivan 2.0 BiTDI 2011 CFCA, all OK.

[Dau]

Hi!

Could you make it for Odis 6.2.0?

[Tadk]

Hi!

Could you make it for Odis 6.2.0?

https://cartechnology.co.uk/showthread.php?tid=75061

[paskuale]

2510 tested yesterday with Audi A6 4G CRTD.
Immo online job.
Perfect!
Thank you Mr. Tadk

[Tadk]

Update_ODIS-Service_7.2.1-EU_Postsetup_70201.101.2720_test ( 17,71 Gb )


TEST! No guarantee!

For those who have experience and ability please check it by working on real cars and please write if you find errors or not.
This is not an official postsetup, so you use it on your own risk.
Corrected to work with Softing 505x interfaces under Service 7.2.1 and updates are from version 11.0.1, Postsetup 110001.103.170.

Don't spam thread and PM (Private Message) me for password.
If you want to get the password for my share you need to :
1) Have minimum reputation 25
2) To have at least 3 useful replies on previous updates that i posted until now.
3) Attach the diagnostic log to your feedback (please EDIT car's VIN number)

For those who do not have the necessary reputation, the previous version!


Patch update for 7.2.1 (no problems with log saving):
https://cartechnology.co.uk/showthread.php?tid=58980


Before you start installing Odis from 5054 on Windows 10, you need to do the following:

1) install PDF viewer

2) enable: control panel - uninstall or change a program - enable or disable Windows features -.Net Framework 3.5

3) install font Arialuni

4) installed Visual C++

5) using file bat., install version 6.2.0 with the choice of 5054, then specify the postsetup from version 7.2.1
Attention: if you have installed or are going to install engineering,
then you need to comment out the program folder during the installation
of programs or updates: Program Files (x86)\
##Offboard_Diagnostic_Information_System_Engineering
If after updating or installing a folder with the same name as the commented one appears,
then you need to delete it.
For example: if you install or update the service, then comment out the engineering,
if you install or update the engineering, then comment out the service.

6) The installation file of the program and the bat. file must be in the same folder.

For example Service, desktop location:
Run command prompt as administrator:
cd \Users\username\Desktop
run.bat OffboardDiagSetup-Service_VWMCD_6_2_0-0103_8.exe

For example Engineering, desktop location:
Run command prompt as administrator:
cd \Users\username\Desktop
run.bat OffboardDiagSetup-Engineering_12_1_1-0102_2.exe