[Freddy1]

In my last post I already had problems retrofitting a backup camera with trsvc for f31 lci from 2017, this worked in the end, because I took other pin locations:

https://cartechnology.co.uk/showthread.php?tid=82317

However, for this pdc retrofit I did it like in the instruction again, this means I pinned it in the REM like this:

- Branch A2, GN/WS cable, to PIN 48
- Branch A3, BR/WS cable, to PIN 36
- Branch A4, BL/RT cable, to PIN 53
- Branch A5, BL/SW cable, to PIN 40
- Branch A6, BL/BR cable, to PIN 41
- Branch A7, BL/GN cable, to PIN 52

As soon as I code 507 instead of 508 PDC isn´t working at all, all plugs are plugged in, PDC sensors are new, so I don´t think that could be a problem. If I recode to 507, it works again, any hints?

[jaramillo]

Hello, Does your rem changes whwn you calculate tal with 508?

[Freddy1]

Stays the same, I already checked that

[Node]

You should really read and post any faults you have in a car in such a question.