[-Maxi-]

Hello guys,

I have an Golf MK7.5 year 2017 with 1.6 115HP Diesel engine.

Did much modifications on it (eg 5 to 6 gear modification) but can't get a clear readiness code after disable the egr off part.
So I build in the car a second egr high and low pressure to try to avoid this failure, but as I thought the Delphi ecu did it's job too good.

Now I try to change the whole ecu to a Bosch one and I'm searching for the right flash ori files for it.

As I searched through the internet the emission type and engine type should be no problem to use an Bosch instead.
There exist a functional egr off and readiness patch what Delphi don't have.

May it possible to help me here find the right software file for my golf 7?
I think it should be from a 110 HP 1.6 pre facelift Golf, so the rest can make my tuner.

I have an Bosch ecu bought with following data
Part no.: 04L 907 309E
Sw: 04L 906 021 Es (should be from an Audi A1)

As I found the software should end with... 021 AN.

Please let me know if you need further informations and thank you in advance for your help and effort.

Greetings from Austria
Markus

[-Maxi-]

Little push up