[windinc]

enet will work for it

[NeRkO20]

Just to have a confirmation - this information is 100% true?

I am asking because I lowered an G05 50e (MY2024 and I level 23-xx-xx if I remember well) LCI 3 or 4 weeks ago! And It worked! Used ISTA 4.46.x

Yesterday I tried to do that on a X6 G06 LCI with 23-11-xx and on X7 G07 LCI with 23-07-xx
Used ISTA 4.47.3x and also tried with ISTA 4.45.xx

I don´t understand why it worked on the X5 LCI couple of weeks ago... so I belive you, don´t missunderstand me please. I also got a pop-up in ISTA "Secure Token.....download..." on some place....

[NeRkO20]

With AOS Version of ISTA....same issue....

the ABL runs well...get positive response from ista that the values are saved...
then I get failure in Kombi "suspension not working..." and if you check live values...front left is at -3348

[Node]

Maybe you just want to lower TOO MUCH!? That is basically outside of it programmed parameters.

[NeRkO20]

no, the g05 I mentioned I did 35mm front and rear. No problem.

On G06 and G07 tried 5mm, 10mm,20mm and 30mm...all ends up with same failure.

Just few minutes ago I tried to lower only rear 35mm! and worked! But front always ends up with failure and only front left, no matter how much!

[evaldazj]

no, the g05 I mentioned I did 35mm front and rear. No problem.

On G06 and G07 tried 5mm, 10mm,20mm and 30mm...all ends up with same failure.

Just few minutes ago I tried to lower only rear 35mm! and worked! But front always ends up with failure and only front left, no matter how much!

Check height sensor, it is weak point for these models.

[NeRkO20]

I gave up! We will buy other links and ount them...

The fun fact on these 2 cars where I had problems, both are "new" and both have same problem with front left sensor - if you put the stock level it accepts the values...
X6 is bulit in 11/2023 and has now 1800km
X7 bulit in 07/2023 and has now 15000km

But thank you for the hint...