[hydrofrein]

Hello everyone, following the ABS block change, I wanted to do the long coding for the new one recovered from the old one, but it was impossible. I used several secure access codes to циLoск it, found online, and Rostech, it worked.
Note: The interface used is a Chinese VCDs version 2023.
Skoda Fabia 2, 2012, gasoline
ABS ESP 8.2, thank you.

[b1tshi1ft]

1) writing coding to this type of unit doesn't need a login code (security access)
2) the device you use to write the coding doesn't matter.
3) the coding defines the car, not the control unit.
4) What is that you have? ABS or ESP? You are mentioning both. Provide a full scan to get proper help.

If you just changed the ABS control unit write back original coding. If that doesn't work you are using a different unit or you are having a different software on it that has a different coding scheme.