[RAMPARTS]

Hi Guys ,apparently my ecu has problems when the car is stopped ,so i got another and swapped the bosch chip that is the uv eprom.
Strangely the ecu that starts the car is mine ,the damaged one ,that has the chip from the other Ecu (new Ecu).
Could my ecu still have a chip that starts the immo that need to be swapped?

I am almost shure i swapped them right..

Best Regards

[nikosmb]

The model is the car ..; and sort ecu

[RAMPARTS]

The car is a volkswagen polo 1.0 and the ecu is a Bosch one

Regards

[rs@chip]

The immo is stored in chip near big-one..I think is 24c02 with b58 mask tip

[RAMPARTS]

Thank you very much for the reply´s i am waiting for my mechanich to bring me again the 2 ecu´s to swap the ic´s ,i even have immo killer software but on mine doesn´t appear the pictures,otherwise i would have noticed that

thanks once again i hope i have them soon because i am 2 months without my car and i am starting to miss him


Best Regards

JOSÉ

[rs@chip]

Dont wory you can easy disable immo on that car..yust come here and post what you have when you recive car and we will help you out..

[RAMPARTS]

Thank you very much alex.eobd2 ,the ecu´s arrived today for chip swapping.
although i plan to use my chinese vag 409.1 but apparently my modified software is only for windows 64bits i am going nuts and i can´t find no link for 32bit vcds :/

another stone on my path :/

Best Regards

JOSÉ

[RAMPARTS]

Thank you once again.

B58 mask chip swapped and new (old Ecu) starts in a snap !
we had find just some times makes that little cut on the throttle ,sorry my english.

Now just with time i will see how it is going ....

Best regards to all the reply´s

[rs@chip]

You are welcome