Possibly Related Threads…

***Jeevs*** · 08-12-2015, 21:25 PM,

Hi,

Any ideas on the solution for my issue? Where I have even re-installed ETKA International and used the Windows 10 32bit hardlock driver. However, it still does not update...

Any help would be much appreciated.

Thanks!

09-12-2015, 11:39 AM,

Hello

I have a ETKA 7.4 Plus (International) installed and I want to upgrade to 7.5 version.

I have download ETK75_UPGRADE.EXE file to update, but when I start the update I obtain an error "ETKA - by carfreak.kiss - not found!"

How can I solve this error? Is it neccessary to remove all the installation and do a new installation?

Thanks

***planet-fireball*** · (This post was last modified: 09-12-2015, 20:40 PM by planet-fireball.)

(09-12-2015, 11:39 AM)volkov Wrote: Hello

I have a ETKA 7.4 Plus (International) installed and I want to upgrade to 7.5 version.

I have download ETK75_UPGRADE.EXE file to update, but when I start the update I obtain an error "ETKA - by carfreak.kiss - not found!"

How can I solve this error? Is it neccessary to remove all the installation and do a new installation?

Thanks

Yes,
you have to install carfreak.kiss Release 7.4 to do the Upgrade with ETK75_UPGRADE.EXE to ETKA 7.5 ! nod

(08-12-2015, 21:25 PM)Jeevs Wrote: Hi,

Any ideas on the solution for my issue? Where I have even re-installed ETKA International and used the Windows 10 32bit hardlock driver. However, it still does not update...

Any help would be much appreciated.

Thanks!

There is still no working Updater for the 7.4/7.5 carfreak.kiss International Version.
You have to apply the Updates manually.

You can take the Updates from THIS post.

***waiapasi2006*** · 14-12-2015, 19:34 PM,

Thank you for the password. OP

I downloaded the file and extracted it.
Now, to go through the install I get the same options as in post #7
Choose option?
I want to do a clean install of the 7.4 then upgrade to 7.5 as that is the only way to get the update.

Any help with this please?

Also per your instructions;
Upgrade to Version 7.5 failed because updating the following files msvcp100.dll and/or msvcr100.dll. What to do ?
Simply rename these two files in the target folder on your hard drive and try it again

What do you rename these files to?

14-12-2015, 20:38 PM,

I have give reputation and pm you sir idea

but still have not get the password.
Sorry if I seem a little impatient whew

Can you pls send me the password ? happy

***planet-fireball*** · (This post was last modified: 14-12-2015, 20:59 PM by planet-fireball.)

(14-12-2015, 19:34 PM)waiapasi2006 Wrote: Thank you for the password. OP

I downloaded the file and extracted it.
Now, to go through the install I get the same options as in post #7
Choose option?
I want to do a clean install of the 7.4 then upgrade to 7.5 as that is the only way to get the update.

Any help with this please?

Also per your instructions;
Upgrade to Version 7.5 failed because updating the following files msvcp100.dll and/or msvcr100.dll. What to do ?
Simply rename these two files in the target folder on your hard drive and try it again

What do you rename these files to?

Hi,
it's quite simple, search the two files in the ETKA folder (via Windows Explorer),
be sure that ETKA 7.4 or Upgrade Installation is not running and rename it
to e.g. msvcp100_old.dll. -> Than you can start ETKA 7.5 Setup.

(14-12-2015, 20:38 PM)JohanP Wrote: I have give reputation and pm you sir but still have not get the password.
Sorry if I seem a little impatient
Can you pls send me the password ?

Hi, i already sent you the password yesterday. wondering

***waiapasi2006*** · (This post was last modified: 14-12-2015, 21:06 PM by waiapasi2006.)

(14-12-2015, 20:49 PM)planet-fireball Wrote:
(14-12-2015, 19:34 PM)waiapasi2006 Wrote: Thank you for the password. OP

I downloaded the file and extracted it.
Now, to go through the install I get the same options as in post #7
Choose option?
I want to do a clean install of the 7.4 then upgrade to 7.5 as that is the only way to get the update.

Any help with this please?

Also per your instructions;
Upgrade to Version 7.5 failed because updating the following files msvcp100.dll and/or msvcr100.dll. What to do ?
Simply rename these two files in the target folder on your hard drive and try it again

What do you rename these files to?

Hi,
it's quite simple, search the two files in the ETKA folder (via Windows Explorer),
be sure that ETKA 7.4 or Upgrade Installation is not running and rename it
to e.g. msvcp100_old.dll. -> Than you can start ETKA 7.5 Setup.

(14-12-2015, 20:38 PM)JohanP Wrote: I have give reputation and pm you sir but still have not get the password.
Sorry if I seem a little impatient
Can you pls send me the password ?

Hi, i already sent you the password yesterday.

Thank you, I will try that.
Now, I still get the options to choose a file:
Option 1
Option 2

How do I get etka7.4 installed?

***planet-fireball*** · 14-12-2015, 21:41 PM,

(14-12-2015, 20:59 PM)waiapasi2006 Wrote:
(14-12-2015, 20:49 PM)planet-fireball Wrote:
(14-12-2015, 19:34 PM)waiapasi2006 Wrote: Thank you for the password. OP

I downloaded the file and extracted it.
Now, to go through the install I get the same options as in post #7
Choose option?
I want to do a clean install of the 7.4 then upgrade to 7.5 as that is the only way to get the update.

Any help with this please?

Also per your instructions;
Upgrade to Version 7.5 failed because updating the following files msvcp100.dll and/or msvcr100.dll. What to do ?
Simply rename these two files in the target folder on your hard drive and try it again

What do you rename these files to?

Hi,
it's quite simple, search the two files in the ETKA folder (via Windows Explorer),
be sure that ETKA 7.4 or Upgrade Installation is not running and rename it
to e.g. msvcp100_old.dll. -> Than you can start ETKA 7.5 Setup.

(14-12-2015, 20:38 PM)JohanP Wrote: I have give reputation and pm you sir but still have not get the password.
Sorry if I seem a little impatient
Can you pls send me the password ?

Hi, i already sent you the password yesterday.
Thank you, I will try that.
Now, I still get the options to choose a file:
Option 1
Option 2

How do I get etka7.4 installed?

Please read my previous posts carefully, before you ask !
Here is the answer to your question: >>> LINK <<<

***waiapasi2006*** · 14-12-2015, 21:50 PM,

(14-12-2015, 21:41 PM)planet-fireball Wrote:
(14-12-2015, 20:59 PM)waiapasi2006 Wrote:
(14-12-2015, 20:49 PM)planet-fireball Wrote:
(14-12-2015, 19:34 PM)waiapasi2006 Wrote: Thank you for the password. OP

I downloaded the file and extracted it.
Now, to go through the install I get the same options as in post #7
Choose option?
I want to do a clean install of the 7.4 then upgrade to 7.5 as that is the only way to get the update.

Any help with this please?

Also per your instructions;
Upgrade to Version 7.5 failed because updating the following files msvcp100.dll and/or msvcr100.dll. What to do ?
Simply rename these two files in the target folder on your hard drive and try it again

What do you rename these files to?

Hi,
it's quite simple, search the two files in the ETKA folder (via Windows Explorer),
be sure that ETKA 7.4 or Upgrade Installation is not running and rename it
to e.g. msvcp100_old.dll. -> Than you can start ETKA 7.5 Setup.

(14-12-2015, 20:38 PM)JohanP Wrote: I have give reputation and pm you sir but still have not get the password.
Sorry if I seem a little impatient
Can you pls send me the password ?

Hi, i already sent you the password yesterday.
Thank you, I will try that.
Now, I still get the options to choose a file:
Option 1
Option 2

How do I get etka7.4 installed?

Please read my previous posts carefully, before you ask !
Here is the answer to your question: >>> LINK <<<

I read that post.
Here is the problem I am getting. I deleted everything I extracted. Started from beginning. From the first 10 parts of zip files I extracted, I have tried to install that application within. (ETKA_V2015)
Once the application starts, I get what the member in post "7" has posted.

As for the questions I had asked you prior, I needed to install your version of ETKA 7.4 before I upgrade to 7.5

However, I still can't get pass those options listed. Do you have just the 7.4 files somewhere else I can use to install 7.4 first?
Below you will see the application I tried first.

14-12-2015, 23:37 PM,

Just finish installing ETKA_Full_74_Germany and all ok.
The I started installing "ETK75_UPGRADE.EXE" and the I got an error:
Se picture:

Version 7.4 international. Win7, 32 bits

Windows Task Manager:

Any suggestions`?

Possibly Related Threads…
Thread		Author	Replies	Views	Last Post
	01J Gearbox Audi A6	masserata	1	35	17-05-2024, 19:47 PM Last Post: sixcode
	VAG Flashdaten Latest Official & Original Complete Packages (5.2024)	vagvag	164	45,681	16-05-2024, 20:45 PM Last Post: vagvag
	Skoda Octavia 2021 1.5 hibrid batery problem	kukata_83	4	86	16-05-2024, 09:58 AM Last Post: kukata_83
	Audi Q7 Climatronic File ( 4L0910043B ) Help - Sgo	rece1p23	0	24	14-05-2024, 19:25 PM Last Post: rece1p23
	Audi A5 BCM 2 strange issue	CodeDoc	4	111	13-05-2024, 19:06 PM Last Post: Audi1234
	2019 Audi A1 - Pre Sense Drive train fault - ABS Coding	rehatflogs	2	70	13-05-2024, 10:13 AM Last Post: rehatflogs
	parameters of the steering rack Audi A6C8 4N0909144E from RS	VAGPRODRIVE	1	239	09-05-2024, 13:19 PM Last Post: Artem2287096
	ELV SEAT IBIZA	amtdiag	0	49	07-05-2024, 23:09 PM Last Post: amtdiag
	Audi A6 C8 Matrix LED 8G4 retrofit coding	Jonas225	4	426	07-05-2024, 11:50 AM Last Post: slimshouki
	Audi A8 4e flash file	Partizaniukas	3	83	06-05-2024, 17:34 PM Last Post: Partizaniukas

Contact Us