Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

Aged Thread 】 ONLY DTC off Here!
21-04-2016, 08:41 AM, (This post was last modified: 18-04-2017, 16:38 PM by Clusters.)
Post: #181
RE: DTC off for free
Hello, I also have the paid version of ASC software not the modified one, the dpf off was made with Swiftec by someone else and the EGR off I tried to make it with ASC.

this is the original file, thank you very much!


Attached Files
e87 118d ori file.rar
File Type: .rar
Downloaded: 19 times
Size: 80.22 KB

21-04-2016, 09:13 AM, (This post was last modified: 18-04-2017, 16:38 PM by Clusters.)
Post: #182
RE: DTC off for free
(21-04-2016, 08:41 AM)egyclick Wrote:  Hello, I also have the paid version of ASC software not the modified one, the dpf off was made with Swiftec by someone else and the EGR off I tried to make it with ASC.

this is the original file, thank you very much!

Ok that makes complete sense wink2

2 files all should be fine now. I dont think swiftec solution with asc solution is compatable, better stick with one solution lets see laughing

[Image: OxNUyuy.jpg] All VAG immobiliser adaptations here.
Many tools available = VAG ME7x LC AL NLS offline MOD tool + kg- BMW EDC16 IMMO TOOL + KG - BMW EWS remover tool + KG - med17 immo v2.3 - BMW-LAND ROVER-MINI EWS OFF TOOL + many more sw: PM me with what you need.
[+] 2 users say Thank You to ROD-BENDERS for this post
21-04-2016, 09:17 AM,
Post: #183
RE: DTC off for free
Great, I will let you know how it goes, thank you very much for you great service!
22-04-2016, 07:07 AM, (This post was last modified: 18-04-2017, 16:31 PM by Clusters.)
Post: #184
RE: DTC off for free
Hello Buzzard, I tried the file 'e87 118d ori file_dpf_off_egr_off_csok' Fgtech then told me the write was not successful and to write the original file back so I wrote the original and the car started fine.

I used the other file made with Swiftec for dpf and ASC for egr where the fault code was removed and it works up to now.

thank you!

(21-04-2016, 09:13 AM)Buzzard Wrote:  
(21-04-2016, 08:41 AM)egyclick Wrote:  Hello, I also have the paid version of ASC software not the modified one, the dpf off was made with Swiftec by someone else and the EGR off I tried to make it with ASC.

this is the original file, thank you very much!

Ok that makes complete sense wink2

2 files all should be fine now. I dont think swiftec solution with asc solution is compatable, better stick with one solution lets see laughing
Reputation: +1 - ROD-BENDERS [+1]
[+] 2 users say Thank You to egyclick for this post
22-04-2016, 07:18 AM,
Post: #185
RE: DTC off for free
Excellent well done Egyclick ! Thanks for sharing the solution, its better when we all work together wink2

[Image: OxNUyuy.jpg] All VAG immobiliser adaptations here.
Many tools available = VAG ME7x LC AL NLS offline MOD tool + kg- BMW EDC16 IMMO TOOL + KG - BMW EWS remover tool + KG - med17 immo v2.3 - BMW-LAND ROVER-MINI EWS OFF TOOL + many more sw: PM me with what you need.
22-04-2016, 10:37 AM,
Post: #186
RE: DTC off for free
Hello, need dtc off P2463 for ford fiesta edc17c10(I already do dpf off with swiftec but noe i get this error.


Attached Files
fiesta 1.6 tdci edc17c10.zip
File Type: .zip
Downloaded: 31 times
Size: 1.14 MB

22-04-2016, 11:15 AM,
Post: #187
RE: DTC off for free
Hi
can someone do for this file O2 sensor off ??

Please


Attached Files
Astra h 1.3 Ecu 2709A143.rar
File Type: .rar
Downloaded: 22 times
Size: 210.12 KB

22-04-2016, 12:43 PM,
Post: #188
RE: DTC off for free
Enybody here ???
23-04-2016, 13:32 PM,
Post: #189
RE: DTC off for free
Hello i need dtc off in Kia EDC16c39 p1186
Thanksyes


Attached Files
m58.rar
File Type: .rar
Downloaded: 16 times
Size: 471.29 KB

25-04-2016, 09:17 AM,
Post: #190
LFord  RE: DTC off for free
Please dpf off mondeo mk4 2007 2.0 tdci sid206, no volta and ecusafe
SW ver.: 7G91-12K532-PH
Spare: 7G91-12A650-UH
HW Ver.: 6G91-12B684-BA
Ford Mondeo 140.rar
File Type: .rar
Downloaded: 21 times
Size: 76.39 KB



Forum Jump:


Users browsing this thread:
6 Guest(s)

Return to TopReturn to Content