[nymike]

Broke my icom and waiting for replacement and need help setting up my j2534 launch box to make it work for now. Can't figure it out, nothing works can someone help via TeamViewer, can pay paypal. Thx.

Sent from my HTC One_M8 using Tapatalk

[eautocheck]

Broke my icom and waiting for replacement and need help setting up my j2534 launch box to make it work for now. Can't figure it out, nothing works can someone help via TeamViewer, can pay paypal. Thx.

Sent from my HTC One_M8 using Tapatalk

This was from someone else (sweetsam I think). I don't remember who but it works.

in ediabas.ini interface must be changed to "pasthrud"

1- Rheingold system installed
2- BMW standerd tool 2.12
3- every passthru tool comes with its drivers cd
4- pttbmw v xxx im using v2.1
5- ediabas configuration tool


after complete step 1 start install bmw standerd tool 2.12 with check box ,inpa ediabas , ncexpert ,winkfp, choose std:obd for hardware for interface ,com 9 for com port ,
finish and restart pc ,now after restarting pc you have to install you tool drivers (passthur) ,
then install pttbmw vxxx (i prefer v2.1) open start>all program>bmw passthrud >passthrud configration and select your tool from the list check in k-line support for 115200bps
press launch confing tool complete by pressing ok , now open program file >bmw ag >passthrud > make copy for all files in this folder exept ediabas.bin file and
paste in c:\ediabas\bin\replace all files with the copy you made , use ediabas configration tool to chanege from std:obd to passthrud ,
start Rheingold and open setting select vci config select EDIABAS STANDARD SITTING and close setting , work done .

this system now ready to work with bmw cars with one tool using inpa,ncsexpert tool ,winkfp and bmw Rheingold (ISTA-D)

[nymike]

I saw it, followed and not working.

Sent from my HTC One_M8 using Tapatalk

[eautocheck]

Edited since it did not help. Works for me but I do not know what steps you followed and I don't use teamviewer

[nymike]

Did as u posted but still no communication with the car.

Sent from my HTC One_M8 using Tapatalk

[TsiliR53]

K

Broke my icom and waiting for replacement and need help setting up my j2534 launch box to make it work for now.  Can't figure it out,  nothing works  can someone help via TeamViewer,  can pay paypal.  Thx.

Sent from my HTC One_M8 using Tapatalk

This was from someone else (sweetsam I think). I don't remember who but it works.

in ediabas.ini interface must be changed to "pasthrud"

1- Rheingold  system installed
2- BMW standerd tool 2.12
3- every passthru tool comes with its drivers cd  
4- pttbmw v xxx  im using v2.1
5- ediabas configuration tool


after complete step 1 start install bmw standerd tool 2.12 with check box ,inpa ediabas , ncexpert ,winkfp, choose std:obd for hardware for interface ,com 9 for com port ,
finish and restart pc ,now after restarting pc you have to install you tool drivers (passthur) ,
then install pttbmw vxxx (i prefer v2.1) open start>all program>bmw passthrud >passthrud configration and select your tool from the list check in k-line support for 115200bps
press launch confing tool complete by pressing ok , now open program file >bmw ag >passthrud > make copy for all files in this folder exept ediabas.bin file and
paste in c:\ediabas\bin\replace all files with the copy you made ,  use ediabas configration tool to chanege from std:obd to passthrud ,
start Rheingold  and open setting select vci config select EDIABAS STANDARD SITTING and close setting ,  work done  .

this system now ready to work with bmw cars with one tool using inpa,ncsexpert tool ,winkfp and bmw Rheingold  (ISTA-D)

Did as u posted but still no communication with the car.

Sent from my HTC One_M8 using Tapatalk

Pulling up this old trend. Did you get the J2534 passthrud working gents?

Can you give us all an update?