Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
E93 Windows/Doors problem, Comfort Access
18-07-2016, 02:30 AM,
Post: #1
|
|||
|
|||
E93 Windows/Doors problem, Comfort Access
Hi,
M3 2010 E93 Battery was drained, since then windows do not move (little bit) when door is closed/opened, Comfort Access doesnot work after that, New FRM3 module was installed and programmed, all lights work fine, Windows were regulated manually, plus thru INPA Windows go up and down normally (including with one click) but they still dont move when door is closed/opened where to look? what could cause it? |
|||
18-07-2016, 12:49 PM,
Post: #2
|
|||
|
|||
RE: E93 Windows/Doors problem, Comfort Access
(18-07-2016, 02:30 AM)Levanime Wrote: Hi, Did you try the trick with holding the window switches up for 10 seconds, with doors closed? |
|||
18-07-2016, 17:09 PM,
Post: #3
|
|||
|
|||
RE: E93 Windows/Doors problem, Comfort Access
I did,
I've also regulated them thru INPA |
|||
18-07-2016, 17:43 PM,
Post: #4
|
|||
|
|||
RE: E93 Windows/Doors problem, Comfort Access
Due to lack of better ideas I would suggest to recode the whole car as it can be that CAS or FRM or JBE do not realize its convertible and operate like in other body types. I suppose there are no related fault codes and new FRM was properly encoded?
|
|||
18-07-2016, 18:36 PM,
Post: #5
|
|||
|
|||
RE: E93 Windows/Doors problem, Comfort Access
Don't move when door is open or stop to move when open it. (If in moving it's).
|
|||
18-07-2016, 18:54 PM,
Post: #6
|
|||
|
|||
RE: E93 Windows/Doors problem, Comfort Access
(18-07-2016, 17:09 PM)Levanime Wrote: I did, I found this in another forum (e90post), coming from a BMW tech: Initialization is performed on the power window switch of the relevant door. Requirements for correct initialization: • Initialization with engine running • Convertible top, doors and windows closed Initialization comprises: • Erasure of initialization • Reinitialization An initialization must be performed: • In the event of malfunctions, e.g. no one-touch control function, no opening or if available no comfort function is possible • After the power window drive has been replaced • After work is carried out on the power window mechanism • After a power supply interruption, e.g. disconnection of the battery or disconnection of the power supply to the door • After the door window glass has been removed and installed or replaced • After adjustment work on the door window glass • After adjustment work on the convertible top • After replacement of seals Erasure of initialization: • Open door window glass fully • Operate power window switch in "Open" position four times within 10 seconds This erases initialization of the power window, anti-trapping protection and toll function are inactive. Check whether one-touch control (toll) function is inactive, otherwise repeat procedure. Reinitialization: Avoid a break between the two steps! • Open door window glass fully • Operate and hold power window switch in "Close" position (second switch stage) • Once the upper end position has been reached, hold power window switch in "Close" position for approx. 2 seconds longer • Open door window glass fully • Operate and hold power window switch in "Close" position (second switch stage) • Once the upper end position has been reached, hold power window switch in "Close" position for approx. 2 seconds longer. |
|||
21-07-2016, 16:20 PM,
Post: #7
|
|||
|
|||
RE: E93 Windows/Doors problem, Comfort Access
Thank you!
OF course FRM is encoded correctly, everything (besides the issue described) works fine (lights, etc) I've tried reseting manually, but got stuck on it: "Check whether one-touch control (toll) function is inactive, otherwise repeat procedure." Its not clear to me what it means, after doing as per instruction, opening window fully and then clicking open 4 times within 10 seconds, I try to close window with one click and it closes, so probably i am doing something wrong, thats why i went to INPA and reseted it from there, in FRM menu you just click reseting it, windows go all the way down, then all the way up and thats it |
|||
21-07-2016, 17:32 PM,
Post: #8
|
|||
|
|||
RE: E93 Windows/Doors problem, Comfort Access
(21-07-2016, 16:20 PM)Levanime Wrote: Thank you! I'm glad you got it sorted out. |
|||
21-07-2016, 18:40 PM,
Post: #9
|
|||
|
|||
RE: E93 Windows/Doors problem, Comfort Access
Sorry for misunderstanding,
i did not sort it out, i did not write that |
|||
21-07-2016, 18:48 PM,
Post: #10
|
|||
|
|||
E93 Windows/Doors problem, Comfort Access
Is right FA for E93 in FRM?
Windows are initialised with INPA or ISTA/D? Right ZUSB programmed? Upload FSW_PSW.TRC here. If my post helped you hit the thanks and reputation button.
BMW F32 435d xDrive Coupe 12/2016 - Stage 2 609 + 7XP NBT EVO | 6NW Wireless Charging | 6WD WLAN-Hotspot Retrofits: 6WB Black Panel Cluster| 337 M-Sport Package | 715 M-Aerodynamic Package | 7XA M-Steering Wheel + Shift Padles | HELC LCI Tail lights | 3AG Rear View Camera | 5A1 LED fog lights | 552 adaptive LED Headlights | 430 Interior/Exterior Mirror Package | 760 Shadow-Line | 8TN Option iDrive DRL | 8TL DRL with Rear lights | OMSA SSA Memory | 4WD Laptimer | 6CP CarPlay | 6NR BMW Apps | 248 Steering heating | 6AS Driving Assistent with Front Collision Warning, People Warning and Lane Change Warning + Yamaha R6 RJ09 10/2004 - Stage 1 |
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
Retrofit comfort access BMW f26 | santopalermo | 13 | 412 |
14-05-2024, 12:25 PM Last Post: ruben_17non |
|
Bmw G31 retrofit Mgu id7 atm problem | intranet | 20 | 2,641 |
26-04-2024, 08:06 AM Last Post: smilo |
|
NBT EVO Connected Drive problem after update I-Level | SkeYT | 47 | 4,889 |
22-04-2024, 11:44 AM Last Post: kwat |
|
BMW E60 coding problem | GarageX | 8 | 390 |
02-04-2024, 10:07 AM Last Post: GarageX |
|
Bmw 5,f10 radio problem | RobertRexhaj | 3 | 182 |
28-03-2024, 18:47 PM Last Post: Unspec |
|
ISTA launcher problem | Red_bean_bun | 1 | 296 |
26-03-2024, 05:11 AM Last Post: 2013m5 |
|
Dme Cas synchronization Problem | donjuan020 | 3 | 292 |
25-03-2024, 21:55 PM Last Post: BmwMerc |
|
BMW e39 530d 2001 problem after MAF change | boweld11 | 3 | 189 |
24-03-2024, 22:44 PM Last Post: SkeYT |
|
Entrynav2 Maps Problem | Chillmeister | 3 | 392 |
24-03-2024, 17:18 PM Last Post: Chillmeister |
|
For anyone having problem with ICOM NEXT FW update via ISTA+. | ImmBoo | 16 | 4,592 |
24-03-2024, 11:29 AM Last Post: Twointje |
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content