Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Winols 2.24
27-12-2016, 10:40 AM,
(This post was last modified: 14-10-2018, 13:01 PM by ROD-BENDERS.)
Post: #1
|
|||
|
|||
Winols 2.24
Making checksums with Winols 2.24 tutorial
Peeps keep asking me how to make checksums for ecu files, so here is a little tutorial that should help all of you who dont know how to do this get started using winols. Checksums are very important, get them wrong and car wont start or even worse 1. If you havent installed winols 2.24 first, then do so, it can be found here on CT using the search button, this is not the search box 2. Open winols, and after you will see the empty working box, picture 1A. Now drag and drop your ecu file onto this box as in picture 1B. Now in picture 1, you can see there are 3 checksums that need correcting, winols will do this for you. 3. Follow the instructions in each picture 1a - 10 and this should get you started making checksum for your own files. Included are two ecu files, Audi A6 3.0 lambda off ME7.1.1, one with "nochecks" (no checksum) and the other with "csok" (checksum ok). Good luck all CT ! |