Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Ultimate Ediabas/ISTA+ voltage control V3
11-11-2017, 07:34 AM,
Post: #101
|
|||
|
|||
RE: Ultimate Ediabas/ISTA+ voltage control V3
|
|||
11-11-2017, 13:53 PM,
Post: #102
|
|||
|
|||
RE: Ultimate Ediabas/ISTA+ voltage control V3
- Im using STD:OBD, so i renamed existing obd32.dll to obd32.ebas.dll in Folder "Rheingold\Ediabas\Bin"
- Copied obd32.dll to "Rheingold\Ediabas\Bin" - Copied NodeISTAVoltageControl.dll to "Rheingold\Ediabas\Bin" - Replaced IstaOperation.exe within ISTA+'s "TesterGUI\Bin\Release" folder by included one (from folder v4.08.13) - Runned AllowFakeISTAOperation.reg file (for x64 cause of x64 Operating System) Ista is working fine, but Voltage display is still showing "-" for KL15/KL30. What im doing wrong? Attached some Screenshots |
|||
11-11-2017, 14:05 PM,
Post: #103
|
|||
|
|||
RE: Ultimate Ediabas/ISTA+ voltage control V3
Have you started NodeEdiabasVoltageControl.exe?
|
|||
11-11-2017, 14:27 PM,
Post: #104
|
|||
|
|||
RE: Ultimate Ediabas/ISTA+ voltage control V3
|
|||
13-11-2017, 06:25 AM,
Post: #105
|
|||
|
|||
RE: Ultimate Ediabas/ISTA+ voltage control V3
|
|||
13-11-2017, 07:47 AM,
Post: #106
|
|||
|
|||
RE: Ultimate Ediabas/ISTA+ voltage control V3
|
|||
13-11-2017, 11:56 AM,
Post: #107
|
|||
|
|||
RE: Ultimate Ediabas/ISTA+ voltage control V3
(13-11-2017, 07:47 AM)Node Wrote:(13-11-2017, 06:25 AM)blax123 Wrote:(11-11-2017, 14:05 PM)Node Wrote: Have you started NodeEdiabasVoltageControl.exe? For Sure. My old ISTA_D (4.03.31) Installation is on an external drive with your V2 running ISTA-D 4.08.13 is on my Daily SSD with V3 Data, ISTA-D working fine but no Voltage display |
|||
13-11-2017, 21:23 PM,
Post: #108
|
|||
|
|||
RE: Ultimate Ediabas/ISTA+ voltage control V3
Looooooooooool
it suddenly started working without doing anything problem "solved", thanks Node! |
|||
14-11-2017, 13:48 PM,
Post: #109
|
|||
|
|||
RE: Ultimate Ediabas/ISTA+ voltage control V3
Just as an aside. I have tried this with Ediabas that comes with BMW tools. It seems not to work with that. Works ok with the Ediabas within ISTA. I wonder why.
|
|||
14-11-2017, 14:09 PM,
(This post was last modified: 14-11-2017, 15:04 PM by Node.)
Post: #110
|
|||
|
|||
RE: Ultimate Ediabas/ISTA+ voltage control V3
Last time I tried it did work with INPA. But the only thing that changes there are those two battery/ignition circles. Not much point in those.
Support for v4.08.21 added. |
|||
Reputation: +2 - Cowboy [+1] , DJenka [+1] | |||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
ista 4.46 Standalone | kiranabc | 33 | 2,928 |
51 minutes ago Last Post: Siki78 |
|
ISTA Standalone Licenserequest up to v4.37.4x | Sedoy | 8,648 | 627,467 |
2 hours ago Last Post: Sedoy |
|
ista for use whit vcx se | db8000 | 0 | 29 |
5 hours ago Last Post: db8000 |
|
AOS Ista possible to deactivate second check after scan? | RaoulK1998 | 17 | 303 |
10 hours ago Last Post: RaoulK1998 |
|
ISTA 4.46.xx problems and possible solution | Sedoy | 76 | 7,308 |
Yesterday, 20:02 PM Last Post: Node |
|
Update ISTA at once 4.43.40 (ISTA Update Program) | charlesjyw | 34 | 6,446 |
Yesterday, 10:39 AM Last Post: MINIGP1610 |
|
BMW ISTA-P Rheingold 69.0.200 (Torrent File) | carsoftcare | 1 | 125 |
26-03-2024, 12:09 PM Last Post: hlip |
|
ISTA launcher problem | Red_bean_bun | 1 | 156 |
26-03-2024, 05:11 AM Last Post: 2013m5 |
|
Adding a new vehicle/model to "Reingold" ISTA+ | dieselweasel | 12 | 666 |
25-03-2024, 08:11 AM Last Post: Node |
|
REQUEST ista 4.45.21 the ISTAGUI.exe file | ddsx | 5 | 325 |
24-03-2024, 14:15 PM Last Post: Mathijshee |
Users browsing this thread:
4 Guest(s)
4 Guest(s)
Return to TopReturn to Content