Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
0x9CD3 - Software version and coding index
31-07-2017, 17:41 PM,
Post: #1
|
|||
|
|||
0x9CD3 - Software version and coding index
Hey! I just tried to program (with ISTA P 3.62 and ICOM) an FRM3 on an E84, when ista do all the work just get an X on FRM (no coded) and send this message 0x9CD3 Software version and coding index.
Just read the failures on ISTA D and say the same, but without a test plan... i need some help with this! Thanx Alex |
|||
01-08-2017, 07:38 AM,
Post: #2
|
|||
|
|||
RE: 0x9CD3 - Software version and coding index
Is the FRM accessible normaly trough OBD or are there any issues?
is it the original FRM for this car or a second hand? did you try to code it with NCS? |
|||
01-08-2017, 15:40 PM,
Post: #3
|
|||
|
|||
RE: 0x9CD3 - Software version and coding index
(01-08-2017, 07:38 AM)oceandiver86 Wrote: Is the FRM accessible normaly trough OBD or are there any issues? I can read the failure on ISTA D, say the same (Software version and coding index) can delete this failure. Yes, the FRM is a new one. I dont know how to use NCS thanx |
|||
02-08-2017, 20:23 PM,
Post: #4
|
|||
|
|||
RE: 0x9CD3 - Software version and coding index
Is it a second hand FRM or a new FRM from the dealer.
ISTA-P isn't the first choice to code second hand parts. download the bmw standart tools and the daten files for your car. |
|||
02-08-2017, 21:29 PM,
Post: #5
|
|||
|
|||
RE: 0x9CD3 - Software version and coding index
Please....ista-p is a perfect choise to program his unit.
MGU virgin and patching in Europa.
Secure coding 2.0 Feature installer codes |
|||
02-08-2017, 21:46 PM,
Post: #6
|
|||
|
|||
RE: 0x9CD3 - Software version and coding index
|
|||
03-08-2017, 19:31 PM,
Post: #7
|
|||
|
|||
RE: 0x9CD3 - Software version and coding index
New one should work fine with ista-p
what interface are you using disconnect the battery for ca15min and try again make sure to have a stable power supply |
|||
03-08-2017, 20:33 PM,
Post: #8
|
|||
|
|||
RE: 0x9CD3 - Software version and coding index
(03-08-2017, 19:31 PM)oceandiver86 Wrote: New one should work fine with ista-p I use ICOM A2. Just do that reset... and doesnt work; i can start with a new computer but then goes down. One time a lose the JBE, i just change the JBE and can program the FRM3 again... its weird... |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content