[pesona]

@abdulrehman download file in point no 4 and read the location.
backup the old and extract the downloaded file.

[botya]

@pesona Great job, friend. Thanks to enthusiasts like you, I never regretted that I was making a donation to this site.

[spajdermen]

Hawe someone this error
Error (1.18)-9.890
win7 x32bit laptop original c4
version 03/18

[pesona]

Try to self test your sdconnect and upload the result please

[spajdermen]

With 07/17 work perfect
i hawe original and china sdconect same problem

03/18 XENTRY work good but only problem with DAS

can someone send DAS BIN working folder plis

[abdulrehman]

@abdulrehman download file in point no 4 and read the location.
backup the old and extract the downloaded file.

Thanks I will try and let you, due to some windows issue my laptop crashed i have to start all over again.

[JSL]

Thanks for the instructions! I managed to install Xentry on Windows 10. However, after re-enabling internet connection I now get the "No access authorization code" error. It looks like the step 4 is not enough to stop this from happening?

[pesona]

Thanks @JSL for the feedback. noted. but it is weird. i have tried install in win 10 x86 32bit dell e5510, sometimes connected to internet to update addons and it is no problem.
i don't use it anymore because i just want to feel the win10. my win7 so far no problemo.

[JSL]

Thanks @JSL for the feedback. noted. but it is weird. i have tried install in win 10 x86 32bit dell e5510, sometimes connected to internet to update addons and it is no problem.
i don't use it anymore because i just want to feel the win10. my win7 so far no problemo.

I have 64bit Windows 10 running on Toughbook CF-19 mk3, but I suspect the issue is not the 32/64 bit or the hardware. How long did you have it connected to the internet and did you have Xentry or standalone DAS running at the time?

After installing and applying the fixes etc. I was able to launch Xentry without issues and I also configured the network to allow communication with SDConnect C4 (I did not try plugging it into the car and running diagnostics). Rebooted the computer and did it all again to make sure everything was working. It was. Then maybe 30mins later Xentry would not start anymore but would show me the "No access authorization code" error.

I should note this exact same thing happened with Win7 (32bit) and the Xentry (also version 2017.12) installation that was on the computer when it arrived from China.

[pesona]

@JSL you are correct. don't worry, there are many ways to block, eg using 'host' windows block etc.

@douglas_brock please look at first post and help me to test in real with axor, atego, hkn etc. it would be nice, if you kindly documented it in video. i tested with actros mp2. thanks in advance
lkw is different with other vehicles. only lkw that has different files for sim and real diagnostic.