Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
XENTRY XDOS & PassThru how to install for dummies
16-05-2018, 05:45 AM,
(This post was last modified: 16-05-2018, 05:48 AM by porsche911gtr.)
Post: #201
|
|||
|
|||
RE: XENTRY XDOS & PassThru how to install for dummies 2018 (include Tips & Tricks))
help fault xentry 5 2018
thanks help fault thanks |
|||
16-05-2018, 11:45 AM,
Post: #202
|
|||
|
|||
RE: XENTRY XDOS & PassThru how to install for dummies 2018 (include Tips & Tricks))
failed to check VIN. probably hardware error. kindly do sdconnect selftest (selftest is in sdconnect toolkit) and upload it here the result.
|
|||
18-05-2018, 04:30 AM,
(This post was last modified: 18-05-2018, 05:12 AM by Roturbo.)
Post: #203
|
|||
|
|||
RE: XENTRY XDOS & PassThru how to install for dummies 2018 (include Tips & Tricks))
:
Hello to all. I have install this version and it is working, but not with all cars. For example, c204 from 2015 works, and others also, but testing a C205 from 2013/14 and i get the error 1.59920.1. -------------------------------------- [18.05.2018 07:00:49] Falha de comunicação (1.59920.1) : GAL:Failed to read the battery voltage com.teradyne.ds.gradex.asam3d.Asam3dHWException: Error details: null; null MCDError: eCOM_NO_CONNECTION (0xea10) Vendor-description: GAL:Failed to read the battery voltage (1) at intern/prepareInterface%20-%20Task/NODE5 in file:/C:/Program%20Files/Mercedes-Benz/xentry/Kontexte/Allgemeine_Ablaeufe/Fahrzeug-Kommunikation/Asam.gmf ----------------------------- I notice that the problem start because no battery voltage reading, on the table with Vas5054 or Actia XS i have try to connect to several cars, most of them works and ask to power on ignition,, but some like C205 simply fail on this step. On the pass other people have same type of problem with other interfaces like C3 and C4, but on this case is Passthru, and i have confirm it is working on other models. Any one have same problem and have solve it ? Please help me to solve this. Tanks in advance. |
|||
18-05-2018, 11:02 AM,
Post: #204
|
|||
|
|||
RE: XENTRY XDOS & PassThru how to install for dummies 2018 (include Tips & Tricks))
Your problem is not only with w205 but with any euro5 or euro6 car....
Try and with w213 or w222 and so on and you will have the same error,,.. Its a serious bug from daimler and this because you install on 32bit os,,... Install the xentry passthru on 64bit and you been fine but your actia vci if is the old yellow not supported on 64bit!!.. |
|||
19-05-2018, 00:32 AM,
(This post was last modified: 19-05-2018, 00:49 AM by Roturbo.)
Post: #205
|
|||
|
|||
RE: XENTRY XDOS & PassThru how to install for dummies 2018 (include Tips & Tricks))
.
Hello. Tanks for you replay. (18-05-2018, 11:02 AM)Grease Monkey Wrote: Your problem is not only with w205 but with any euro5 or euro6 car.... I have try all models, (listed next), i have only the interface connected to power, the ones with Error - 1.59920.1 are the models that simply stop on first step. The good ones have the battery voltage and ask for ignition,, or they just open DAS. Not working B247 A valid serie was not selected CLA 118 A valid serie was not selected A117 Error - 1.59920.1 C205 Error - 1.59920.1 E238 Error - 1.59920.1 E213 Error - 1.59920.1 S222 Error - 1.59920.1 S217 Error - 1.59920.1 X 290 AMG Error - 1.59920.1 CLS 257 Error - 1.59920.1 GLE 167 Error - 1.59920.1 GLE 167 Error - 1.59920.1 GLC 253 Error - 1.59920.1 Working (Ignition OK = on xentry) or open DAS A176 Ignition OK A169 Open DAS A168 Open DAS B242 246 Ignition OK B245 Open DAS C204 Ignition OK C203 Open DAS C202 Open DAS 190 201 Open DAS E212 Ignition OK E211 Open DAS E210 Open DAS E207 Ignition OK 124 Open DAS S221 Open DAS S220 Open DAS S140 Open DAS S126 Open DAS cla117 Ignition OK CLK209 Open DAS CLK208 Open DAS CLS218 Ignition OK CLS219 Open DAS CL216 Open DAS CL215 Open DAS CL140 Open DAS SLK SLC 172 Ignition OK SLK 171 Open DAS SLK 170 Open DAS SL 231 Ignition OK SL 230 Open DAS SL 129 Open DAS SL 107 Open DAS AMG GT 190 Ignition OK SLS 197 Ignition OK GLE 292 Ignition OK M/GLE 166 Ignition OK M 164 Open DAS M 163 Open DAS G 463 Open DAS G 461 Open DAS G 460 Open DAS GL/GLS 166 Ignition OK GL 164 Open DAS GLK 204 Ignition OK GLA 156 Ignition OK R 256 Open DAS (18-05-2018, 11:02 AM)Grease Monkey Wrote: Its a serious bug from daimler and this because you install on 32bit os,,... It looks like that, because if i chose a 204 and try to read the FIN/VIN of the 205 is reads it correct, but the software notice is the wrong series/model and stops. This prove that there is no problem with Actia or VAS5054 interface, it is only software problem/bug because the install is on 32bit. Also Actia software is able to diagnose many units, but not all. (18-05-2018, 11:02 AM)Grease Monkey Wrote: Install the xentry passthru on 64bit and you been fine but your actia vci if is the old yellow not supported on 64bit!!.. That is my problem, at first i did try and install it on 64bit, but than i have problems with the drivers "Passthru" for Actia XS (old yellow/blue) and also VAS5054. So i´m stuck, if i stay on 32bit i will not diagnose a lot of models, but if i go 64bit i have no drivers for my interfaces. (is there any solution for this ?) Tell me, did you test that models on 64bit version, or there is other people with the same type of problem only in 32bit ? Regards. . |
|||
Reputation: +2 - pesona [+1] , ross2018 [+1] | |||
19-05-2018, 02:17 AM,
Post: #206
|
|||
|
|||
RE: XENTRY XDOS & PassThru how to install for dummies 2018 (include Tips & Tricks))
The problem as i said is for all euro 5/euro6 cars,, so this problem is for xentry only,, with Das all ok or with Xentry euro4 cars (example w204, w212 and so on)....
For the old actia vci not exist driver for 64bit os... The vas5054 head supported for 64bit os but not know as passthru device,, me never i use vas head as passthru.. You can use the vas5054a driver from any odis installation and you can try,,.. |
|||
Reputation: +1 - pesona [+1] | |||
19-05-2018, 04:28 AM,
Post: #207
|
|||
|
|||
RE: XENTRY XDOS & PassThru how to install for dummies 2018 (include Tips & Tricks))
.
Hi Grease Monkey. 2 problems that oppose to each other, and you (i) can´t have both at same time... Maybe we see in short time some correction or a add-on that solve the problem,,,.. do you know if 2016 Passthru version have the same problem ? Or better, maybe someone figure it out how to correct this problem, sometimes is a simple thing. Any way, i´m happy because now i have a tool to work on many Mercedes that i didn´t have before, my C3 work for around 10 years,, than die. Tanks for your replay |
|||
19-05-2018, 21:29 PM,
(This post was last modified: 19-05-2018, 21:32 PM by Moldovan1.)
Post: #208
|
|||
|
|||
RE: XENTRY XDOS & PassThru how to install for dummies 2018 (include Tips & Tricks))
I installed Xentry 2018/3 passthru (thanks Pesona - all you patch work just fine) over 2016 version on Dell D630, Win7, 32 bit. Adapter is VAS5054. I tested on Sprinter W906, work fine. Good news - that on every start Xentry ask what Passthru adapter to use in this session (no need to install 5 passthru drivers @Sixcode solution@). But from another side - I CRY......, then I read in this topic, that is not posible to diagnostic on any Euro 5 or 6 cars with Passthru adapter on 32 bit system.
|
|||
19-05-2018, 22:59 PM,
(This post was last modified: 19-05-2018, 23:03 PM by Roturbo.)
Post: #209
|
|||
|
|||
RE: XENTRY XDOS & PassThru how to install for dummies 2018 (include Tips & Tricks))
(19-05-2018, 21:29 PM)Moldovan1 Wrote: I CRY......, then I read in this topic, that is not posible to diagnostic on any Euro 5 or 6 cars with Passthru adapter on 32 bit system. Hello Moldovan1, but you can try one thing to verify if works or not,,, just plug the interface to PC and to 12v power, try to open a 204, chose Diagnostic, and see it it goes to the point it ask for IGNITION... With mine it does,, than try to do the same on a C205,, if it gives you the error 1.59920.1 it means that the "problem" is the same on new version, and so it means that they only support 64bit as announced one Xentry PT page, as other member tell us. Give a try and report... you can also check other models like i listed above on other message. Also tell me if the 2016 version is (was) working with C205 or any other models pointed that give error. Regards. . |
|||
20-05-2018, 06:19 AM,
Post: #210
|
|||
|
|||
RE: XENTRY XDOS & PassThru how to install for dummies 2018 (include Tips & Tricks))
Hello to all,
Can someone guide where to delete/remove some unwanted Pass Thru listed in the drop down when just start Xentry. I've added some by error and don't want to see them there ! |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
34 Guest(s)
34 Guest(s)
Return to TopReturn to Content