[brahem]

Hallo
Is there a way to change the Languages in DAS SIM mode?

Thank you

[tsimplas007]

I recently bought a license for EU PassThru system from MB to use it with VAS5054A. I also have a Star Diagnosis system with SDConnect.
The reason I bought the PassThru, is that I want to perform online programming & SCN coding on control units when it is needed.
Cars like W211.All, W209.All, W164.122, W204.041 for example are not visible in XENTRY. Is it possible to make them visible? I'd like to have the ability to run initial startup on 7Gtronic control unit on W164.122 car.

Best Regards

[pesona]

i have several pms from new members that can't make configassist to accept old keys.
i apologize. i admit i was not write it clearly the step no 4.
so i have re-write the step no 4. please check it again. i hope this help.

@brahem
add -len in the das sim shortcut for english language
look Post: #360 as the idea

@tsimplas007
possibly your xentry key license is the xentry_light not the xentry_full.
anyway, cmiiw, all the cars you mention are DAS car.
can you try to use das standalone to diagnose, programming etc?
what do you think?

[brahem]

i have several pms from new members that can't make configassist to accept old keys.
i apologize. i admit i was not write it clearly the step no 4.
so i have re-write the step no 4. please check it again. i hope this help.

@brahem
add -len in the das sim shortcut for english language
look Post: #360 as the idea

@tsimplas007
possibly your xentry key license is the xentry_light not the xentry_full.
anyway, cmiiw, all the cars you mention are DAS car.
can you try to use das standalone to diagnose, programming etc?
what do you think?

thank you changing languages is working

---

what is the best OBD adapter , any link to shop

thank you

[pesona]

for passenger car, you can buy high quality vas5054a. Search in forum the criteria for good or high quality one.
i read many positive feedback from members regarding vas5054a use with xentry/das.

[dj.yanni]

hy ,
I have a problem with xentry , The problems I tried yet are with an C204 and B246, When I trie to connect, it connects for a moment ,It finds the vin number an than I have an error that the vin number is not correct,push further a couple times than the multiplex disconnects and get error 1.53315.9999, no life sign, I tried it with different cars and different versions 07/2018 and 09/2018 and tried different multiplexers, It is all the same , is there anyone who can help me please ,I use windows 7 pro SP1 32bit

[shatl1]

hi
Installed 032018-in xentry not online (does not require a login and password)
is there a way out?

[Shreyash786]

hi
Installed 032018-in xentry not online (does not require a login and password)
is there a way out?

Better to use the latest version mate.

[pesona]

@shatl1

if you want to program ecu 'offline', there are several options:

1. in xentry, you have to buy xentry calculator. there are several members sell it
2. vediamo is the way to go to program ecu offline and is used by daimler factory
3. if you want only for 204.041 as above, you can try to use 204 in DAS. and there is free offline programming

between those three options, vediamo is the best and can be used for 99% vehicle's model

[shatl1]

i need scn
vediamo I have already programmed
but I know people use even older versions for online.
Is there any solution?