[xhead]

Sounds like you installed the PassThru version... it can't work with C4 as far as I know.

[bimmer71]

hi
i applied the starkey patch to my windows registry (win10 64bit). but key generated with keygen is still not accepted in configassist. keeps saying "Provided StartKey is invalid"

can anyone please help? thanks!

DID YOU ALLPER RG PATCH  run as admin , may be problem as well double check time ant date on pc/laptop , that will mess stuff up , turn auc off aka to lowest level

[Piktas]

Where i can find all values about my injectors, air mass, pressures and etc?
Here is a picture of Xentry seen blocks in my w212.
Maybe there are some "addons" to see more blocks?
Sorry for newbie questions 

[B4RTJ]

Where i can find all values about my injectors, air mass, pressures and etc?
Here is a picture of Xentry seen blocks in my w212.
Maybe there are some "addons" to see more blocks?
Sorry for newbie questions 

220 cdi? you need to find engine (motor electronics). run quick test, and you should see CDI unit. go there and than you will see faults, actuactions, adaptations and ACTUAL VALUES. thats what you need.

[Piktas]

Where i can find all values about my injectors, air mass, pressures and etc?
Here is a picture of Xentry seen blocks in my w212.
Maybe there are some "addons" to see more blocks?
Sorry for newbie questions 

220 cdi? you need to find engine (motor electronics). run quick test, and you should see CDI unit. go there and than you will see faults, actuactions, adaptations and ACTUAL VALUES. thats what you need.

Yes, 220 cdi. After quick test, i see only same blocks as in the picture above. There is no CDI unit.

[pesona]

@Piktas
it is weird.
what passthru device do you use?
it looks like you use win10. is it x86(32bit) or 64bit?

[Piktas]

Im using MINI-VCI J2534, Win10 64 bit.
Same cable on Win7 64 bit, can see CDI unit.
Maybe the MINI VCI driver is only for Win 7?
Maybe someone can share the driver for Win 10 (MINI VCI J2534)?
Thanks for any help.

[uuid9099]

Hi pesona, thank you very much for this guide!

I installed XDOS 09.2018 on Win7 x86, installed the latest addons and applied the patches you posted. When I start Xentry simulation for a W212, the program crashes with a Java error. Any idea what might be wrong?

[paskuale]

Hello,
first I want to say a big "Thank you" for Mr. Pesona! Thank you for your help and for your work!
I'm your fan!
I have a question about trick to avoid loose of startkey when online.
I installed successfully Xentry Xdos 12.2018 (also tested on the car).
I make a copy of lic2 file, change extension to .x4711 and make it READ ONLY.
But trick is not working for me.
When I connect internet I lost startkey and need to enter a new one.
Does anyone test it successfully on 12.2018 ?
Thank you

[uuid9099]

Hi pesona, thank you very much for this guide!

I installed XDOS 09.2018 on Win7 x86, installed the latest addons and applied the patches you posted. When I start Xentry simulation for a W212, the program crashes with a Java error. Any idea what might be wrong?

Just a follow-up. After rebooting the error disappeared. Simulation now works as expected. Don't know what went wrong and I hope it doesen't come back.