[Piktas]

Is it possible to deactivate seat belt warning using Xentry? If yes, which unit is responsible for that? W212

[MilenaG]

Piktas@, yes, it is possible, instrument cluster.

---

But it will be better to make new thread, this one about instalation of the program.

[Rik]

I cant link WIS from DAS using F6 key, give me error xwsapi.exe not found

[minooooo2012]

there is any password i would need to extract the file ? , i will setup it on win 7 64 bit , and use vas5054 , if there is any ideas to do before start setup or a guide would be awesome

[hsw1009]

@pesona, chipsoft lite works perfect with xentry pt, especially after updating drivers for device.

---

@filipe08, xentry pt works only with can modules, it is not possible with k-line.

Hi Sir:

Could I use chipsoft lite with DTS 8 for mercedes-benz W205?

Thanks.

[MilenaG]

hsw1009@, unfortunately I don't know about connection chipsoft lite with DTS, I use sd connect for this purpose. But the manufacturer of chipsoft, Denis, promised in near future lay out a decision on connecting chipsoft with vediamo.

[barantk1]

xentry passtruh work in win7 32 bit ??

[pesona]

@MilenaG
i supply Dennis with vediamo to test with his +24v pld temic atego k-line ecu. he updates his beta chipsoft driver.
what surprise me is when i use partD (c3) or sdconnect, i have to choose properties and k-line number (e.g 4,5,7) to connect to ecu but with chipsoft its option is only k-line 1 and it works.
i don't test it for k-line ecu in passenger car. probably different. the cons is easily burned for 24v.
afaik, i ever test vediamo with sprinter CAN ecu, and it connects but i do not do more than connect only.
have you try your vediamo to test with current chipsoft driver for pkw?
it needs only set the slave.ini with chipsoft device name.

@barantk1
it works but not all ecu. Read Roturbo post. it should be 64bit and plus, you can gain 64bit superior over 32bit.

[MilenaG]

@pesona, thank you for information. I didn't try yet, but now I will make an attempt. I have only can car, don't have with k-line ecu. When I talked with Denis, he said that not all version of vediamo is possible to connect. I have 5.00.05. Is it suitable for test?

[pesona]

@MilenaG
afaik, only vediamo 4.02.02 have the setting for passthru device (part j).

@Rik
click F6 in DAS after patch, it works at it should. it will show the helps in WIS.

@minooooo201
the first post of this thread is the way to go. please read step by step how to install xentry passthru.