[krazzdav]

Hello,

I become a error message, when i start sim das.

I can click at ok and sim das runs. But why i become this error message?

thanks for help

go back and make sure you followed the process correctly including the simdasa file; I believe you are missing a file or copied the wrong shortcut to your desktop

[diagnostic206]

The Problem was in Windows 10 x64
In Windows 7 x64 works all fine

[krazzdav]

The Problem was in Windows 10 x64
In Windows 7 x64 works all fine

I will test mine as it too is W10... do you have secure boot turned off in your bios?

[krazzdav]

Hello,

I become a error message, when i start sim das.

I can click at ok and sim das runs. But why i become this error message?

thanks for help

you probably don't have admin rights to the das/bin folder since you say you click ok and it runs; i have my UAC turned off and dont have any error when i launch sim das on win 10

check and see once you launch das sim (and while it is still open) that in the das/bin there is a DAS32R2x.exe file and that your shortcut to launch is actually pointed to simdasa.bat. After you close sim das the DAS32R2x.exe should be replaced by DAS32R2sd.exe

[barantk1]

my friends, I installed xentry passtruh 12.2018 on the win7 x64 opscayjnym, the computer is dell e6420 i5 4gb ram. I have a problem now because I do not know which head to use with passtrokes. I have vas5054a or toyota vci heads ?? which is better to use, on which head will it sticky ?? Please help me thanks thanks and rep

I will also add that I have not yet installed the drivers for the passtries device, but when I include xentry I have two errors:
1- fatal erroe 104 there is no sae j2534 configuration available
2 - error 1: SelectPTDevice could not be started

please help

[krazzdav]

my friends, I installed xentry passtruh 12.2018 on the win7 x64 opscayjnym, the computer is dell e6420 i5 4gb ram. I have a problem now because I do not know which head to use with passtrokes. I have vas5054a or toyota vci heads ?? which is better to use, on which head will it sticky ?? Please help me thanks thanks and rep

I will also add that I have not yet installed the drivers for the passtries device, but when I include xentry I have two errors:
1- fatal erroe 104 there is no sae j2534 configuration available
2 - error 1: SelectPTDevice could not be started

please help

I used toyota mvci and worked fine. 
Run the xhorse mvci driver install then open your device's com port settings in device manager and make sure the cable is recognized after rebooting. If it is not recognized and has error you need to update driver on device manager and point to toyota driver you just installed. I had to do this 2 times pointing to the driver as there are 2 parts. 

After you verify you can see the cable then run xentry it should give you an option to select the passthru device.

[barantk1]

everything runs the program has started. Tomorrow I will connect the vito vito w639 and w447 to check if it connects. I hope for a toyota mvci it will work well.

[barantk1]

Continued problems. The software starts, but after selecting the car, the xentry does not want to connect with the car. All the time there is a window in the picture in the attachment. Please help.

[krazzdav]

Continued problems. The software starts, but after selecting the car, the xentry does not want to connect with the car. All the time there is a window in the picture in the attachment. Please help.

I cant understand what it says but I had the same problem --- did you go into the device manager for your computer and ensure the the j2534 adapter is actually being seen by your computer? You shouldn't have any errors / ! marks. You can unplug the adapter and plug it back in and should see it change in the COM ports. Send a screenshot of your device manager connections with the COM ports expanded and your adapter connected.

I still had to point drivers directly to the adapter in device manager 2 times to make it work and recognize the adapter after I ran the driver installation program.

[barantk1]

In the Device Manager everything is ok without drivers. I installed the drivers twice, in an hour I will send the screen of the device manager, and you also had the same situation as when the connection between the xentry and the vehicle was working, and so it shines unchanged even 15 minutes. ?? I have. Heads for vas5054 can I use it as a device passtruh ???