[ivkera82]

@ivkera82
you intend to use 17v vas5054a with 24v das lkw vehicle.

1. I use 12-24v converter

• if it is only step downs the 24v of pin 16 of obd2 to 12v, you need to know that pin 7 (k-line), pin 8 (ignition), pin 15 (L-line) from k-line ecus are 24v. it is better to use 24v capable passthru device
  

2. get error  loading control table error loading CNT file

• you have to copy the contents of DAS 'LKW' folder, and other missing DAS folders from xdos with 'same release' of your xentry passthru
  

3. I test with 12.2018. and 03.2019. Both work on cars and transporter very good

• good work mate. i appreciate it.
  

fyi, in the first post, i wrote that DAS lkw is not supported by passthru. 

for education only (not for sellers ), das bus and bharatbenz are directly can be diagnosed by only copy the folders from xdos even for all k-line ecus. INS as the gateway is k-line ecu but no problem while i don't change anything. someday i need to learn all the harness because lkw is different story.  
GM as the gateway has two options. by default is k-line. 
i have to stop here. i have x my line. please have a fun to research.

I try to find other missing das lkw folder but no success
its all das lkw folder in first post?

[pesona]

hi,
you have to install xentry xdos then copy das lkw and other missing das folder from xdos.
your program is xentry passthru.

[ivkera82]

Hi,
One more question. 
Mercedes special functions calculator can work with xentry passthru?

[pesona]

yes, it will work with xentry passthru too.

[ivkera82]

@ivkera82
you intend to use 17v vas5054a with 24v das lkw vehicle.

1. I use 12-24v converter

• if it is only step downs the 24v of pin 16 of obd2 to 12v, you need to know that pin 7 (k-line), pin 8 (ignition), pin 15 (L-line) from k-line ecus are 24v. it is better to use 24v capable passthru device
  

2. get error  loading control table error loading CNT file

• you have to copy the contents of DAS 'LKW' folder, and other missing DAS folders from xdos with 'same release' of your xentry passthru
  

3. I test with 12.2018. and 03.2019. Both work on cars and transporter very good

• good work mate. i appreciate it.
  

fyi, in the first post, i wrote that DAS lkw is not supported by passthru. 

for education only (not for sellers ), das bus and bharatbenz are directly can be diagnosed by only copy the folders from xdos even for all k-line ecus. INS as the gateway is k-line ecu but no problem while i don't change anything. someday i need to learn all the harness because lkw is different story.  
GM as the gateway has two options. by default is k-line. 
i have to stop here. i have x my line. please have a fun to research.

I try to find other missing das lkw folder but no success
its all das lkw folder in first post?

Hi,
I coppy missing folders but now i get SimDAS error.
Can not open Thesaurus File C\Program Files\Mercedes-Benz\DAS\thesaur\002\thesaugb.dbz
Where i made mistake?

[ktyy]

I cloning SSD china with the version 12/2018...
I have activated (foto 1).
But when I try to open Xentry, DAS, StartKeyCenter, Vediamo... it I get this (foto 2):

Do we have a solution to overcome this protection? 

Or the KG for this?

[camaro]

I cloning SSD china with the version 12/2018...
I have activated (foto 1).
But when I try to open Xentry, DAS, StartKeyCenter, Vediamo... it I get this (foto 2):

Do we have a solution to overcome this protection? 

Or the KG for this?

The best solution is to install everything from the beginning

Cloning of a china product will hardly ever work

[krazzdav]

I cloning SSD china with the version 12/2018...
I have activated (foto 1).
But when I try to open Xentry, DAS, StartKeyCenter, Vediamo... it I get this (foto 2):

Do we have a solution to overcome this protection? 

Or the KG for this?

Because you are cloning the HWID are different and you need to get a new key to activate

[Wizen]

Hi, who can help me? My Xentry always closes on its own when I try to do a quick test on W213. Is this Java problem? Who can help please?

[Rik]

I cloning SSD china with the version 12/2018...
I have activated (foto 1).
But when I try to open Xentry, DAS, StartKeyCenter, Vediamo... it I get this (foto 2):

Do we have a solution to overcome this protection? 

Or the KG for this?

The only person that calc that password is the china vendor.