[austinsec]

I tried mini vci, is working but is slow and limited on module reading.

what do you recommend? that is not too expensive

[ross2018]

vas5054 is cheap and good for home diagnostic.

[babs]

hi friends
can i use this Mini VCI J2534

as a passthru device for xentry

i have a vas 5054a i cant get to work on 5-2019  on windows 64 bit. problems whit the driver.

[ross2018]

Mini vci is slow and limited on reading modules.

[babs]

Mini vci is slow and limited on reading modules.

thx m8.
maybe  you can guide me. how can i get my vas 5054a to work not that is does not work now it works on the old models llike w211 from 2003 but i cant get it work on the newer models like w211 or w213.
or maybe you can recoment  me a cheap j2534 device

[ross2018]

Mine is working on r171 and w204, did not test on newer models.

[Paul600600]

can someone tell me will this  work as the passthru device?
https://www.ebay.com/itm/Mini-VCI-J2534-...0667.m2042

---

can someone recommend one there are so many different ones need to get one
ELS27 FORScan
Forscan ELM327
J2354

I use VAS5054A got it from Ebay came with ODIS software. Tested on 2006 CLK and 2014 GLK reads all modules Vidiamo works as well but I only tested it on the HU on the GLK so fare.

[tsimplas007]

I've problem when flashing control units with Win10x64 + XENTRY passthru 05.2019 + VAS5054. The problem occurs ONLY with cars that are diagnosing with XENTRY because it reads a constant voltage of 12V.

The programming process sometimes interrupted due to 12V constant reading. XENTRY prompts to connect charger, I always have a charger connected, but the XENRTY reads always 12V and claims that the voltage is LOW. There are no problems when I'm trying ONLY to do SCN coding.

Flashing/Coding process on cars that are diagnosing with DAS always works and terminates succesfully.

The questions are:

1. Has anyone faced with the problem I described?
2. Is there any solution to this?
3. Alternative passthru devices to do this job with out the VAS5054 voltage/ignition problem?
4. Is the china Actia multidiag a better solution?

PS. The VAS5054 is reworked by me using fantomel guides for reworking.

Best Regards

[Injectorcentr]

Hello to all people!

Thank you very much "pesona"! ! !    

Win7x64 + Xentry PassThru 2018 + scanmatik 2 ( not scanmatik 2 PRO ) = Works 100% bluetooth and USB !
                   
( first install the scanmatik driver )

Tested : x166 , w212 , w221

Old models DAS connects with motor only !

[omanstar12]

    am trying to do offline programming but without success i got this error 

my xentry 9-2016