[austinsec]

HI I get error 51 invalid configuration for this device any ideas vas5045a

[grabbelmanko]

HI I get error 51 invalid configuration for this device any ideas vas5045a

Hello austinsec,

looks like you use a wrong driver or the wrong reg modification.
Which way  did you use?
Medianjoe discription?
If so be sure that the driver is suiting to the reg key.
Most of the times one have to modify the reg key using note pad.
AfaIr it is point 4 in the tip section?

You are not far away from the goal- so keep ahead.
BR
grabbelmanko

[austinsec]

Yes I used his guide ,still not sure how to correct changed now I get error 15

[austinsec]

I am lost , I cant pass the error 15 on the configuration manager.
I think I may have messed up the registry setting any idea how to start allover.

---

Is there anyone that can help please pm me.

[austinsec]

Here is what I have , im installing thee pass through no open shell, win 64
the config mgr gives error on startup error 15, then pretty much crashed during test.
anyone here available to help?

[pesona]

What's new

6. Prevents xentry's key deleted and get "no access authorization code" when diagnosing while online.

a. Webmaster's simple method (simple and SCN SAFE), is advice by BARTJ for xdos & xentry pt.
Purpose: Introduce by Webmaster for XentryXp. And BARTJ advises a user to use it for XDOS. I think this is a simple but powerful and SCN SAFE method to handle the obstacle of deleted XDOS key compare to "appserv method" that many members said that it makes SCN failed. I make a simple batch file but I don't try it online yet.

[grabbelmanko]

I am lost , I cant pass the error 15 on the configuration manager.
I think I may have messed up the registry setting any idea how to start allover.

---

Is there anyone that can help please pm me.

Which colour does the VAS Configuration SW show?
Check the reg file you have used by opening it with Notepad.
Do you find the same driver id as you have used in the installation?
Did you create the c: temp directory?

At which point of the process do get the error numbers.
Have you installed a temp-power-supply?

for helping you we have to get more information about the state you have reached.
Br
grabbelmanko

[austinsec]

I am lost , I cant pass the error 15 on the configuration manager.
I think I may have messed up the registry setting any idea how to start allover.

---

Is there anyone that can help please pm me.

Which colour does the VAS Configuration SW show?
Check the reg file you have used by opening it with Notepad.
Do you find the same driver id as you have used in the installation?
Did you create the c: temp directory?

At which point of the process do get the error numbers.
Have you installed a temp-power-supply?

for helping you we have to get more information about the state you have reached.
Br
grabbelmanko

I plug into car,  I get the error at startup if the con
figuration .exe then at test its alway red. 
I need the stat all over.

[austinsec]

I have made progress , got green light , issue remaining is xentry initialazation of diagnosis multiplexer failed
any ideas?

it was not possible to establish communication module electronic ignition switch

[DBCT]

I have made progress , got green light , issue remaining is xentry initialazation of  diagnosis multiplexer failed
any ideas?

it was not possible to establish communication module electronic ignition switch

Sounds like an issue that should be discussed in another thread. Post multiplexer self test there and also check IP configuration.