[Marko1337]

After i Installed the Trick for wis I get the Internal error 11.0, that xwsapi.exe could not be found

[chomar]

Thank you for all these efforts made by many, I installed it.. Xentry cars seem fine but DAS seems not coming with W209 and W639 only engine ECU comms nothing else, any ideas why I cant do full Test..

Thanks in advance

[pesona]

Thank you for all these efforts made by many, I installed it..  Xentry cars seem fine but DAS seems not coming with W209 and W639 only engine ECU comms nothing else, any ideas why I cant do full Test..

Thanks in advance

please give more informations so that others can help without guessing.
xentry/das version: xdos or xdpt (i guess xdpt)
release:  (i guess 2019-09)
device tool that be used: (i guess toyota techstream)
problem: only engine ecu (i guess k-line problem)

a lot of guesses.

[chomar]

Xentry DAS 09-2019 PT, Xentry seems to work like charm, but DAS only comms with ECU on W209 and W639 using VAS5054.

Thank you all in advance

[ross2018]

Car is kline not can bus if you see only engine ecu.

[ALE009]

Wait, Can I use "MINI VCI J2534" with this setup to run Xentry - Can I do coding and read all modules ? or do I need VAS5054A ?
Can Delphi DS150e work with a passthru?
Do any of PassThru devices work with Vediamo, and if which ones?

[chomar]

Car is kline not can bus if you see only engine ecu.

So I cant comm with the early Vehicles with PT , so C4 is still best way to go then..

[ross2018]

I only used vas5054 ( MINI VCI J2534 si not good, i tried it ) as pass-thru and with this only can bus car is read 100%, kline only engine ecu.
Not sure about other passthru devices.

[ALE009]

Thanks i will opt for VAS

[chomar]

any other interfaces work %100 on DAS? other than VAS5054A?