[labik]

So I did. This is my second installation. After the first installation, it was exactly the same. Several times it worked later no longer.

[gcs190]

So I did. This is my second installation. After the first installation, it was exactly the same. Several times it worked later no longer.

By deduction I would say that the problem is in some solution that you use, how you use it or how you apply it.

[Mr.seymur]

good morning guys help with the question, yes hentry 09.2022, 06.2022 I am installing. without problems, the installation goes on, I apply the patch of the old key, then I create the key. loading. everything sits down successfully. after I open the hentry program, it writes the error "no access rights" please help with this issue

[gcs190]

good morning guys help with the question, yes hentry 09.2022, 06.2022 I am installing. without problems, the installation goes on, I apply the patch of the old key, then I create the key. loading. everything sits down successfully. after I open the hentry program, it writes the error "no access rights" please help with this issue

I guess what you mean is that Xentry doesn't run, it says you don't have access authorization, correct? Use the two DLLs and 2 @connector registry entries.

[kokolo]

Hi,I installed xentry pasthrue 2021 on windows 8.1 64bit and when start diagnose I have not batery status and ignition status at all,select the car diagnose and I get eror 99.58642.0 anybody can help?Thank you

[gcs190]

Hi,I installed xentry pasthrue 2021 on windows 8.1 64bit and when start diagnose I have not batery status and ignition status at all,select the car diagnose and I get eror 99.58642.0 anybody can help?Thank you

Do you have a compatible device and is it installed properly?

To be able to install on W8 you had to modify the installer, if you could update to W10 it would be better.

[arno2]

Hi guys,

Where can I download missing pictures for Xentry PT 22.9.?

[kokolo]

Hi,I installed xentry pasthrue 2021 on windows 8.1 64bit and when start diagnose I have not batery status and ignition status at all,select the car diagnose and I get eror 99.58642.0 anybody can help?Thank you

Do you have a compatible device and is it installed properly?

To be able to install on W8 you had to modify the installer, if you could update to W10 it would be better.

I have tryed with vas 5054 and scanmatic

[gcs190]

I have tryed with vas 5054 and scanmatic

The second I don't know if it works in XPT, there was a thread with a list of devices, look for it, for VAS you simply need the correct drivers.

[kokolo]

I see device in device menager and when start xenty I can choose vas 5054 it should mean that driver is instaled,anyway is it any driver for x64 vas 5054 except Roturbo,s driver