Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

ESys Launcher Premium 2.8.0 Build 143 works utill 28.06.2018
19-03-2018, 15:56 PM,
Post: #21
RE: ESys Launcher Premium 2.8.0 Build 143 works utill 28.06.2018
Launcher Premium 2.8 will NOT work with any E-Sys past 3.28.1
I tested multiple versions past 3.28.1 and none work. Will work on 3.28.1 and 3.27.1 though, didn't try older than 3.27.1.

Hope this helps.
Quote this message in a reply
20-03-2018, 05:35 AM,
Post: #22
XZBMW  RE: ESys Launcher Premium 2.8.0 Build 143 works utill 28.06.2018
(19-03-2018, 10:29 AM)torchia Wrote:  
(19-03-2018, 06:41 AM)Almaretto Wrote:  
(18-03-2018, 18:11 PM)torchia Wrote:  Installed 2.8 launcher with 2.7.1 esys, generated token and using full 63.3 data but can't open svt tree, looks like token not working????

Looks like you are using incorrect chassis.

What chassis? Did you Read ECU?

Launcher set for F010 and i using it on F10. It does read ECU's. Just afraid to proceed with flashing when i see SVT tree in numbers smile

Flashing does not require Launcher.

Image just shows FP as numbers.

I do not see SVT tree; which should show names and CAFD ID's.


Quote this message in a reply
20-03-2018, 09:13 AM, (This post was last modified: 20-03-2018, 09:14 AM by semihmutcali.)
Post: #23
RE: ESys Launcher Premium 2.8.0 Build 143 works utill 28.06.2018
I'm also getting this error win 7 x64
(06-03-2018, 11:28 AM)barteku Wrote:  Hi all,

i have problem with launcher 2.8.0. I am using E-Sys 3.27.1 and after clean installation i have:

"E-sys Launcher Premium has stopped working"

Windows 7 x86 32bit.
Does any body know how to solve this?

Thank you
Quote this message in a reply
24-04-2018, 10:39 AM,
Post: #24
RE: ESys Launcher Premium 2.8.0 Build 143 works utill 28.06.2018
I Can't run esys 2.8.0 build 143 on windows 7 X86 32bit. Esys 3.27.1.

Does any body solve this?

Setubal-Portugal
Quote this message in a reply
06-07-2018, 20:41 PM,
Post: #25
RE: ESys Launcher Premium 2.8.0 Build 143 works utill 28.06.2018
is there any way to run launcher premium after 28.06.18? i am getting PIN window in loop each time when i try to open it.

or other free tool for personal use and do some coding from time to time?

Did an update to latest ilevel and i am trying to activate VIM and ID6 lite.
I was trying to use Bimmercode but it does not recognize the ECU - does not have the coding files (yet).

btw - some small nd nice adjustments have been implemented in NBT GUI at least.
Quote this message in a reply
06-07-2018, 20:48 PM, (This post was last modified: 06-07-2018, 20:48 PM by shawnsheridan.)
Post: #26
RE: ESys Launcher Premium 2.8.0 Build 143 works utill 28.06.2018
(06-07-2018, 20:41 PM)danyro Wrote:  is there any way to run launcher premium after 28.06.18? i am getting PIN window in loop each time when i try to open it.

or other free tool for personal use and do some coding from time to time?
...

Update to Launcher PREMIUM 2.8.2, which is good until 12/30/2018.

[Image: Rear-38-Percent.png][Image: 3-4-View-38-Percent.png][Image: Front-38-Percent.png]
2018 F06 Alpina B6 650ix GC; Space Grey; Vermillion Red Nappa Leather; Executive; B&O; Driving Assistant
2017 F15 X5 xDrive50i MSport; Glacier Silver Metallic; Black Dakota Leather; Executive; B&O; Driving Assistant; RSE
Quote this message in a reply
[+] 6 users say Thank You to shawnsheridan for this post
11-07-2018, 16:03 PM, (This post was last modified: 11-07-2018, 16:25 PM by vasya.)
Post: #27
RE: ESys Launcher Premium 2.8.0 Build 143 works utill 28.06.2018
(06-07-2018, 20:48 PM)shawnsheridan Wrote:  [quote='danyro' pid='353357' dateline='1530909673']


Update to Launcher PREMIUM 2.8.2, which is good until 12/30/2018.

need donate? exist new premium ver. ?
other solution:
you can script (rearm )to clean old premium ver. back system data and run...
Quote this message in a reply
11-07-2018, 16:39 PM,
Post: #28
RE: ESys Launcher Premium 2.8.0 Build 143 works utill 28.06.2018
(11-07-2018, 16:03 PM)vasya Wrote:  need donate? exist new premium ver. ?
other solution:
you can script (rearm )to clean old premium ver. back system data and run...

No donation needed. Just install and use.

[Image: Rear-38-Percent.png][Image: 3-4-View-38-Percent.png][Image: Front-38-Percent.png]
2018 F06 Alpina B6 650ix GC; Space Grey; Vermillion Red Nappa Leather; Executive; B&O; Driving Assistant
2017 F15 X5 xDrive50i MSport; Glacier Silver Metallic; Black Dakota Leather; Executive; B&O; Driving Assistant; RSE
Quote this message in a reply
12-07-2018, 08:51 AM,
Post: #29
RE: ESys Launcher Premium 2.8.0 Build 143 works utill 28.06.2018
sorry, i read as you say about pro...
Quote this message in a reply
15-07-2018, 18:04 PM,
Post: #30
RE: ESys Launcher Premium 2.8.0 Build 143 works utill 28.06.2018
i tried today the new 2.8.2 , installed with E-sys3.28.1 .

the best part is that esys launcher did not even boot , simply nothing showing on the screen , i tried compatibility solution on windows 10 but no matter what settings i setup it doesn't start at all .

windows 10 64bit latest update with .net framework 4.7.2 installed already .

any hint guys ?
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  FEM Not working with ENET but works wtih DCAN armenh7 1 63 54 minutes ago
Last Post: Marx
XZBMW BimmerUtility vs Esys Launchers diagso 556 106,697 4 hours ago
Last Post: Unspec
XZBMW Bmw F10 key works only on steering column Ring Aerial Zuraczu 1 62 Yesterday, 12:51 PM
Last Post: Matthew53
  [MEGA] Any ESYS Editions + PSDZ Full & Lite + ICOM Firmware + MANUALS + TOOLS hashtagmaster 102 34,754 Yesterday, 05:59 AM
Last Post: hashtagmaster
  ISTA launcher problem Red_bean_bun 1 157 26-03-2024, 05:11 AM
Last Post: 2013m5
  I020 esys connection issue mcrussell 6 232 25-03-2024, 23:35 PM
Last Post: vanos
  ISTA launcher console (v1.2.4.11 and up) Node 18 2,694 20-03-2024, 20:30 PM
Last Post: Node
  GenEsys Creator (New Tool FA ESYS) scorpium59 405 29,338 16-03-2024, 21:08 PM
Last Post: scorpium59
  Sharing PSDZdata files between istaP and ESYS BMWlad 23 9,842 16-03-2024, 18:09 PM
Last Post: kuno24
XZBMW coding 2018 bmw bike with ncs expert carlosabh71 11 1,398 16-03-2024, 08:01 AM
Last Post: TheNine90

Forum Jump:


Users browsing this thread:
2 Guest(s)

Return to TopReturn to Content