[EdgaBMW]

Hi guys,
i have issue with rear view camera. My car F36 2018, came from factory with navigation system business and rear view camera. Retrofitted nbt evo and all works fine except rear view camera. When i put R gear camera shows view just for a couple seconds, then screen is grey. Rear view camera in my car is without trsvc module, wires from camera goes directly to head unit. So question, is it impossible to force my camera work, or i need retrofit trsvc module with different camera type?

Thanks for the answers, and sorry for my english

[jararak]

evo's camera dont have special module if you have just rear camera. did you code also trsvc and pdc unit after retrofit? maybe check pinout in quadlock

[EdgaBMW]

Thanks for the reply.
You don't understande me. In my car there is no trsvc module from factory, because wires from camera goes directly to headunit, not from trsvc. In E-sys ecu list i don't see trsvc module, because in my case i think is integrated maybe in headunit, or park assist ecu. PDC works fine, checked pinout everything is ok, camera turns on for a couple seconds, then turns off.

evo's camera dont have special module if you have just rear camera. did you code also trsvc and pdc unit after retrofit? maybe check pinout in quadlock

[jararak]

Thanks for the reply.
You don't understande me. In my car there is no trsvc module from factory, because wires from camera goes directly to headunit, not from trsvc. In E-sys ecu list i don't see trsvc module, because in my case i think is integrated maybe in headunit, or park assist ecu. PDC works fine, checked pinout everything is ok, camera turns on for a couple seconds, then turns off.

evo's camera dont have special module if you have just rear camera. did you code also trsvc and pdc unit after retrofit? maybe check pinout in quadlock

i made f15 camera retrofit, ecu is in camera itselve, try look for rfk unit in esys and recode it with new vo containing evo, check if 3ag is there. you can look for this question here in forum.

[EdgaBMW]

SOLVED. Changed camera ecu type from trsvc to icam in hu_nbt and all works fine.

[/b][b]

Thanks for the reply.
You don't understande me. In my car there is no trsvc module from factory, because wires from camera goes directly to headunit, not from trsvc. In E-sys ecu list i don't see trsvc module, because in my case i think is integrated maybe in headunit, or park assist ecu. PDC works fine, checked pinout everything is ok, camera turns on for a couple seconds, then turns off.

evo's camera dont have special module if you have just rear camera. did you code also trsvc and pdc unit after retrofit? maybe check pinout in quadlock

i made f15 camera retrofit, ecu is in camera itselve, try look for rfk unit in esys and recode it with new vo containing evo, check if 3ag is there. you can look for this question here in forum.