Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
2.5 audi quattro kess problem and stage one needed
28-10-2018, 16:00 PM,
Post: #1
|
|||
|
|||
2.5 audi quattro kess problem and stage one needed
i'm trying my kess device. Just bought audi a4 2.5tdi quattro manual AKE engine.
I was trying to read id, ecu and error of unknown ecu appeared, then proceeded and ended up with sw read error. so then i decided to play with different ecus from the list, and when i chose bosch edc15vm+ rather then bosch edc15vm+2 i received error of unknown ecu, but after i proceeded kess readed ecu. As far as i know pump was changed at some point on this vehicle, can it be that different power output pump was fitted, so kess can't read it when choosing ake engine from the list? the details i managed to extract: HW: 0281010823 SW: 1037351928 VIN nr.: SW ver.: 28SA5486 Spare: Engine: 2.5L V6 TDI AG HW Ver.: SW upg.: 8E0907401D 0006 could somebody look into this, and maybe tune it to stage 1? Will it be safe to write it back? |