[Gizmo520d]

Since a while I've been using ISTA now for my F series.

I always update with the latest files thru the Launcher and then copy the standalone version of the program over it.
Up till version 4.12.12 everything when fine but all versions above that do act different.

What is the difference then you might ask.
Well uptill 4.12.12 I could just connect with enet cable to the vehicle and connect without giving in an IP address in ISTA. Car was found and could be read.
All versions above 4.12.12 won't connect and throw the PFAD error. When I give in the IP address of the car it will connect, but sometimes the connection is very slow.

I already tried starting from scratch with a "new" standalone with the SDP and BLP data from that version, but the issue remains.
Also tried changing ediabas.ini without any luck.

Now I'm running to parallel instances a 4.12.12 and the most up-to-date variant. Where 4.12.12 connects without hassle, the up-to-date one refuses connection until IP address is given.

Maybe @beemerboy88 or @spider80 can shed a light on this?

Thanks in advance!

[Gizmo520d]

No one any idea?

[timelord]

isn`t it a feature ?

[masa52]

whats the point to copy over to standalone when you have license

[Almaretto]

Why are you taking extra step configuring connection with EDIABAS, when ISTA+ will connect via ICOM / ENET?

[Gizmo520d]

Tried the EDIABAS to see if it offered any solution, but it didn't. Normally i just use the direct connection option.