Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
[How-To] Diagbox 7.57 telecoding Server fix
08-12-2018, 20:33 PM,
(This post was last modified: 22-07-2019, 22:00 PM by Itsme.)
Post: #1
|
|||
|
|||
[How-To] Diagbox 7.57 telecoding Server fix
Here's a little how-to for telecoding with newer models (>2016).
It solve the server connection problem and you can manual telecode. Unfortunately, it does not work on all models. Only for the 308 t9 model. I've tried with my 308 GTi (t9) from 2016 and it worked. Telecoding the bsi and almost all ecu's worked for me. (Smeg telecoding gives you an error but if you click on "Ok", it will telecode nevertheless.) Go to folder C:/AwRoot/dtrd/tree/ there are three folders TeleXX TeleXX_PR TeleXX_TPM in each folder there's a file called script_atm_telexx.s Open each file with an editor and replace all with this code: Code: <!DOCTYPE Tree SYSTEM "IPSA.dtd"> It's a modified script from 7.83. It works with 7.57 (maybe with later versions too) but not with 7.83 correctly. |
|||
10-12-2018, 19:44 PM,
Post: #2
|
|||
|
|||
RE: [How-To] Diagbox 7.57 telecoding Server fix
Thanks. I will try but I have 7.58.
Can you share an update file 7.01 to 7.57 If you have it. |
|||
11-12-2018, 16:48 PM,
Post: #3
|
|||
|
|||
RE: [How-To] Diagbox 7.57 telecoding Server fix
No sorry, but there are many updates in the internet.
Just search for it. Or use a virtual machine for vmware or virtualbox. 7.58 should work. Let us know if it works. |
|||
11-12-2018, 18:09 PM,
(This post was last modified: 11-12-2018, 18:14 PM by BhdR.)
Post: #4
|
|||
|
|||
RE: [How-To] Diagbox 7.57 telecoding Server fix
I couldn't code Smeg Plus. I can access the manual telecode section. When I click on the sections(other functions or audio) in the manual telecode nothing happens. I'm trying to code CarPlay.
|
|||
11-12-2018, 22:04 PM,
Post: #5
|
|||
|
|||
RE: [How-To] Diagbox 7.57 telecoding Server fix
Then try it with 7.57.
If you have an Smeg+ than you have no carplay. Only Smeg+ IV. You can't activate a function when the hardware is not present. |
|||
12-12-2018, 10:01 AM,
(This post was last modified: 12-12-2018, 10:07 AM by adamos_22.)
Post: #6
|
|||
|
|||
RE: [How-To] Diagbox 7.57 telecoding Server fix
(08-12-2018, 20:33 PM)Itsme Wrote: Someone (maybe a programmer) could compare this script to the original and find a solution how this codes work and then change it. The following code will search for all occurences of script_atm_telexx.s in subfolders of C:/AwRoot/dtrd/tree/ and replaces them with C:\DIAGBOX_flash_fix\script_atm_telexx.s. I did test it, so it should work. FOR with parameter /R will help you here: FOR /R C:/AwRoot/dtrd/tree/ %%I IN (script_atm_telexx.s) DO COPY /Y C:\DIAGBOX_flash_fix\script_atm_telexx.s %%~fI |