Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Solved ✔ NBT EVO HW4.1 on the bench
15-12-2018, 18:07 PM,
Post: #11
|
|||
|
|||
RE: NBT EVO HW4.1 on the bench
OK so now the NBT stays up
It was just the resistance of 120ohm that was not connected (Thanks Via for the reminder), but my screen (8.8" Touch screen) remains black, the fan does not start and also the iDrive controller does not light ! I'm currently doing some tests with different messages ID but any guidance are welcome. Thanks. |
|||
15-12-2018, 18:13 PM,
Post: #12
|
|||
|
|||
RE: NBT EVO HW4.1 on the bench
ID 202 is light for controller (DIMMUNG (5000ms))
NBTEVO, ENAV2, MGU - CP OFF, Navi , APPS , Carplay, AA
MGU ID-8-9-10 Cars - Full Region change NCD Secure Coding 2.0 |
|||
15-12-2018, 22:00 PM,
Post: #13
|
|||
|
|||
RE: NBT EVO HW4.1 on the bench
Fan won't start a long time in applicationMode.
202 FD FF play with it.. |
|||
08-01-2019, 16:44 PM,
Post: #14
|
|||
|
|||
RE: NBT EVO HW4.1 on the bench
When starting up ZGW on the bench, will not it start with only the following signals?
12F 37 7C 8A DD D4 05 33 06 130 45 40 22 8F FE Please tell me the necessary start-up signal. I am troubled because ZGW does not start. |
|||
10-01-2019, 12:48 PM,
Post: #15
|
|||
|
|||
RE: NBT EVO HW4.1 on the bench
(13-12-2018, 22:07 PM)Vias Wrote: Well guys, I send only this two massage: We can flash the EVO with just ethernet cable/CAN sender/power? No ZGW? What software can be used to do this? |
|||
12-01-2019, 16:34 PM,
Post: #16
|
|||
|
|||
RE: NBT EVO HW4.1 on the bench
My problem was solved !
In fact, the HU has no CAFD in it, so because of that the screen remained black. So after injecting CAFD with Esys the screen turned on and now everything work like a charm. Thank guys for your help. |
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
MGU Bench connection | kimz | 2 | 118 |
Yesterday, 19:13 PM Last Post: kimz |
|
Test bench Connection to CAN ECU's | HaakonA | 3 | 309 |
03-04-2024, 07:24 AM Last Post: sixcode |
|
Tool for bench read 8hp | Garryq | 9 | 1,660 |
26-03-2024, 09:32 AM Last Post: skywoker |
|
Bosch MEVD172H bench backup | mrproper | 1 | 274 |
23-03-2024, 18:43 PM Last Post: Ratnik1990 |
|
ENAV2 bench activation | Airbus | 10 | 938 |
25-02-2024, 08:17 AM Last Post: jb2005 |
|
Motronic 3.3.1 bench | jaramillo | 3 | 213 |
13-02-2024, 05:12 AM Last Post: 2013m5 |
|
Dde Coding/flash with esys in bench? | ruben_17non | 0 | 202 |
08-02-2024, 21:28 PM Last Post: ruben_17non |
|
Entrynav2 - Trying to Trigger Component Protection on Bench | 2002JCW | 5 | 558 |
30-01-2024, 16:44 PM Last Post: DEJMIEN |
|
NBT display on bench without unit | djordan | 4 | 358 |
15-01-2024, 08:08 AM Last Post: Powerlab |
|
cas / cluster bench setup | Cniksor | 103 | 24,364 |
09-01-2024, 09:43 AM Last Post: MIKUr1 |
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content