Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Solved ✔ EDC17CP14 files via OBD2
29-12-2018, 13:28 PM,
(This post was last modified: 02-01-2019, 19:19 PM by ROD-BENDERS.)
Post: #1
|
|||
|
|||
EDC17CP14 files via OBD2
Hey Members,
i am new at the board but it is very helpful for me. my question i have an Audi A6 with an EDC17CP14 ECU, if i will read via obd2 its dosn't work. I have buy an file form an file maker and i have always an checksum error. can someone tell me, can i write this ecu via obd2 kess v2 5.017? its an clone work it? thx for your help! Follow me on Instragam! --> Chiptuning_NRW --> live:chiptuning.nrw
KTAG 7.026 EU - KESS 5.017/2.47 EU
|
|||
29-12-2018, 15:43 PM,
Post: #2
|
|||
|
|||
RE: EDC17CP14 files via OBD2
If ext Flash, do it over bootmode
|
|||
29-12-2018, 17:06 PM,
Post: #3
|
|||
|
|||
RE: EDC17CP14 files via OBD2
First give more info..what year car? and what is ECU software number ?
|
|||
29-12-2018, 17:37 PM,
Post: #4
|
|||
|
|||
RE: EDC17CP14 files via OBD2
clone works like a charm! read and write!
|
|||
29-12-2018, 19:09 PM,
(This post was last modified: 29-12-2018, 19:11 PM by Orange_99.)
Post: #5
|
|||
|
|||
RE: EDC17CP14 files via OBD2
(29-12-2018, 17:06 PM)fisekovic Wrote: First give more info..what year car? and what is ECU software number ? Audi A6 4F 3.0 TDI tiptronic quattro HW: SW: VIN: XXXXXXXXXXXXXXX SW Ver.: Teile: Motor: CDYA HW Ver.: SW Upg.: 4F9910402A 0080 Anlage: 35/1/EDC17_CP14/5/P788//C788C3UX/// that is all what i have respectively what the kessv2 me give from ID (29-12-2018, 17:37 PM)sandor1987 Wrote: clone works like a charm! read and write! hey i dosn't have the read option in the menu, in the manual says that reading is not possible Follow me on Instragam! --> Chiptuning_NRW --> live:chiptuning.nrw
KTAG 7.026 EU - KESS 5.017/2.47 EU
|
|||
29-12-2018, 21:03 PM,
Post: #6
|
|||
|
|||
RE: EDC17CP14 files via OBD2
kess v2.47 protocol 501 edc17cp14 work like a charm
|
|||
29-12-2018, 21:22 PM,
Post: #7
|
|||
|
|||
RE: EDC17CP14 files via OBD2
(29-12-2018, 21:03 PM)playaz187 Wrote: kess v2.47 protocol 501 edc17cp14 work like a charm hey playaz187, i have tested and it says checksum error, can i calculate the checksum or fix it in my file? my fileservice says that the error came because the kess is an clone but i don't believe in him. Follow me on Instragam! --> Chiptuning_NRW --> live:chiptuning.nrw
KTAG 7.026 EU - KESS 5.017/2.47 EU
|
|||
29-12-2018, 22:06 PM,
(This post was last modified: 29-12-2018, 22:09 PM by sandor1987.)
Post: #8
|
|||
|
|||
RE: EDC17CP14 files via OBD2
I did alot of cp14
Never having any trouble... or you have a bad clone or file is not good.. What version do you use of kess? And upload your files mod and ori we can check |
|||
29-12-2018, 22:30 PM,
(This post was last modified: 29-12-2018, 22:39 PM by Orange_99.)
Post: #9
|
|||
|
|||
RE: EDC17CP14 files via OBD2
(29-12-2018, 22:06 PM)sandor1987 Wrote: I did alot of cp14 okay it is very strange, i don't have an ori file only the mod. i upload for you, thx so much. and the next question are can i write this files maybe with k tag to the ecu? or must ja pay for an new file? |