[idolized]

Hi guy. I have a question I hope you all can help.
I have gotten 2018 maps for ROW and trying to install for Audi A7 MMI3G+. I updated to latest firmware 942. Installed ME (middle east maps) and tried to activate (with activation here) but it shows initializing Navigation and  then it just shows navigation data not enabled. In older 2014 or 2016 maps after installing maps & before activating, maps at least shows a while before disabling.  Now with new 2018 maps it does not show at all. Just initializing and then straight navigation data not enabled.

Could someone please help?

Doesn't sound like your activation was properly done.
Try to redo the activation (maybe even delete the activation files and then re-add them into the SD card you plan to use for the activation in your car. If done correctly, there will be a message saying Activiation was successful (or some variation).

Another consideration, try separating the Activation Files onto a different SD Card (not the same one that has the maps update). Remove the maps SD card, so that the only SD card in the car is the Activation files. then push the activation buttons.

[icu07900]

Hi, friend has an HNav. Installed latest firmware. Installed latest navigation map. And applied script activator from post 146. Still the maps stays blocked. Running the activator results in "already applied" message. See attached photo's. Please, could you advice, how we can activate the map in a proper way?

[firarda]

please read post #29 and test accordingly

[icu07900]

please read post #29 and test accordingly

Thanks for your reply. I checked the post now.
In my friends case it's about new firmware, new map, activation (no activation was present).  

The activation initially succeeded. But maps still blocked. 

When activating again, the script says already applied. 

Yesterday evening we uninstalled the activator and tried again. Successfully applied. But maps stay blocked. 
Please advice.

[benyclaudiu]

MHI2_ER_AU57x_P3634

[futzi007]

Hi friends!
I have still the same problem like icu.
I update the firmware und the maps for the first time.
Firmware install works fine! Maps install also! But i can not activate the maps.
I can´t start the activator, because i can´t see him to start.
Please help!!
My holidays start in a few days

[firarda]

please read post #29 and test accordingly

Thanks for your reply. I checked the post now.
In my friends case it's about new firmware, new map, activation (no activation was present).  

The activation initially succeeded. But maps still blocked. 

When activating again, the script says already applied. 

Yesterday evening we uninstalled the activator and tried again. Successfully applied. But maps stay blocked. 
Please advice.

hi
have updated my firmware and map old maps didnt delete. at the beginning navigations works for a short while then it says maps are blocked.
so for the moment my maps are blocked as well. I used activatior from 2018
it is a HNav

I have found two error codes

03175 Invalid data set and
03276 - Softwareversionsmanagement prüfen

do you have any solutions

[icu07900]

please read post #29 and test accordingly

Thanks for your reply. I checked the post now.
In my friends case it's about new firmware, new map, activation (no activation was present).  

The activation initially succeeded. But maps still blocked. 

When activating again, the script says already applied. 

Yesterday evening we uninstalled the activator and tried again. Successfully applied. But maps stay blocked. 
Please advice.

hi
have updated my firmware and map old maps didnt delete. at the beginning navigations works for a short while then it says maps are blocked.
so for the moment my maps are blocked as well. I used activatior from 2018
it is a HNav

I have found two error codes

03175 Invalid data set and
03276 - Softwareversionsmanagement prüfen

do you have any solutions

Hi firarda,
Unfortunately our mmi map is still blocked. 

Uninstalled the activator and reinstall didn't help. Hoping to hear solution from someone who had same problem to activate map on HNav.

[firarda]

i guess I solved the problem, at least after 10 minutes navi is not blocking the map

for the others just follow bigjoe https://cartechnology.co.uk/showthread.p...t=audi+map
and update the activator (first uninstall the old one) with the same method you are uninstalling the activator (or keldors activator method) according to the instruction. do need to go through red menu.

I hope it stays ON

the problem is that the instruction could be more specific for beginners. anyway great community great job guys.

It still has one error in VCDS I will to solve it as well. error code 03175

[muskaddem]

Another question, i am gonna be visiting Turkey this summer and haven't seen any information about the supported countries in this version. Is Turkey map included in this release?

Thanks so much for your guidance!
Best,