Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
SID 305 WEIRD CHARACTERS ON HW AND SW ID AFTER READ
26-01-2019, 09:31 AM,
Post: #1
|
|||
|
|||
SID 305 WEIRD CHARACTERS ON HW AND SW ID AFTER READ
i read a sid 305
the hw id and sw id in the saved files are weird characters and not the real ones. see the attached image. is it dangerous to write this file on ecu after edit? how can i edit and correct this values in the read file? |
|||
26-01-2019, 18:27 PM,
Post: #2
|
|||
|
|||
RE: SID 305 WEIRD CHARACTERS ON HW AND SW ID AFTER READ
(26-01-2019, 09:31 AM)chicco Wrote: i read a sid 305 what did you do with modifyed file?does same no. apear with ori one? |
|||
27-01-2019, 00:22 AM,
Post: #3
|
|||
|
|||
RE: SID 305 WEIRD CHARACTERS ON HW AND SW ID AFTER READ
as you Can see in the Pic i attached It is the ori file loaded. i read It 4 times but Always have weird characters in hw and sw id
|
|||
28-01-2019, 16:39 PM,
Post: #4
|
|||
|
|||
RE: SID 305 WEIRD CHARACTERS ON HW AND SW ID AFTER READ
any idea if it's safe to work with this ori file or not?
|
|||
31-01-2019, 12:05 PM,
Post: #5
|
|||
|
|||
RE: SID 305 WEIRD CHARACTERS ON HW AND SW ID AFTER READ
mates, is there someone who can help me please?
thanks a lot |
|||
01-02-2019, 15:06 PM,
Post: #6
|
|||
|
|||
RE: SID 305 WEIRD CHARACTERS ON HW AND SW ID AFTER READ
I cannot see the file you read?
Don't ask for FREE FILES
Most tuning fies tested on Dyno by myself Tuning - DPF Off - EGR Off - or any etc Certificated WinOLS Trainer |
|||
03-02-2019, 05:26 AM,
Post: #7
|
|||
|
|||
RE: SID 305 WEIRD CHARACTERS ON HW AND SW ID AFTER READ
Is it a nissan or renault ? It happened to a friend before to damage ecu after writing Nissan 1.5 DCI SID305 with kess V2. Its not 100% safe. I read sid 309 before with pcmflash. Then i put this file to kessV2 and see the same characters as you. I write back file with pcm flash and all was ok. I did not take the risk of writing with kessV2.Better use other tool to read again and write. Also be careful. You will find 1.5mb files and 2 mb files in the net according to sid 305. I thinks it depends on car and tool.
Regards |
|||
16-02-2019, 15:44 PM,
Post: #8
|
|||
|
|||
RE: SID 305 WEIRD CHARACTERS ON HW AND SW ID AFTER READ
Had the same today on a Fluence, also SID305
Got also 5-digits instead of 10-digit numbers. I think that's the way how it is on those Ecu's... Read/Write done without any issues, 5 min read and 10 mins write Kess 5.017 Ksuite 2.47 |
|||
17-02-2019, 08:48 AM,
Post: #9
|
|||
|
|||
RE: SID 305 WEIRD CHARACTERS ON HW AND SW ID AFTER READ
same here on SID309. when selected the tuned file for writing some weird characters appeared.
I wrote the file anyway with no issues .... |
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
Need original file read by ktag forToyota Dyna 89663-37600C | tigre | 0 | 19 |
17-05-2024, 21:30 PM Last Post: tigre |
|
ecu full read | khaledDsfk | 0 | 58 |
06-05-2024, 12:23 PM Last Post: khaledDsfk |
|
FIAT EDC16C39 read/write | isamyku | 3 | 218 |
25-04-2024, 08:08 AM Last Post: YGRemaps |
|
How to read TOYOTA 2ADFHV | kantusjack | 0 | 59 |
24-04-2024, 22:49 PM Last Post: kantusjack |
|
Need Virtual Read for Kess2 EDC17CP14 | Moldovan1 | 1 | 95 |
24-04-2024, 06:43 AM Last Post: loki954 |
|
Tool to read Denso Isuzu Opel Corsa ECUs | MasterMulder | 3 | 165 |
18-04-2024, 09:18 AM Last Post: MasterMulder |
|
How to read ME 3.1.1 | stjansdal | 2 | 110 |
01-04-2024, 11:54 AM Last Post: stjansdal |
|
ME7.1.1 8E0910560J full read needed | Andreis | 0 | 90 |
18-03-2024, 19:40 PM Last Post: Andreis |
|
1.8T AUM Bora Stage 1 read out and flash? | Speedy_07 | 3 | 166 |
11-03-2024, 09:52 AM Last Post: Elijah |
|
ECU read write lock | gvitkis | 2 | 650 |
05-03-2024, 20:24 PM Last Post: robertop |
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content