Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
ODIS newer than 4.1.4 with clone VAS5054 (Solution)
11-02-2019, 20:20 PM,
(This post was last modified: 16-02-2019, 23:14 PM by karlfrosch.)
Post: #1
|
|||
|
|||
ODIS newer than 4.1.4 with clone VAS5054 (Solution)
Hello guys,
i read a lot in this forum, how to use old VAS5054a with new versions of ODIS. The main thing i read about is to replace the PDU-API with the latest working one for Clones 1.20.041. Thats not a great thing, but for me it don´t work. ODIS can´t connect to the car. After a lot of reading in inet i found the solution for this. After replacing dpu api to v 1.20.041 its needed to edit the file C:\ODIS-DIAG-MODULES\MCD-SERVER\VWMCD\MCD3D_Server.ini find MCD3D_MVCI_PDU_API_Shortname="D_PDU_API_DSA" and edit to this MCD3D_MVCI_PDU_API_Shortname="EDIC_D_PDU_API_1_20_041" EDIT: some tests later the shortname can be different, depending on your installs and how to install the PDU-API the correct shortname is in file C:\ProgramData\D-PDU API\pdu_api_root.xml the part with the 1.20.041 drivers For ODIS-E it works also but the path is little different C:\ODIS-DIAG-MODULES-ENGINE\MCD-SERVER\VWMCD\MCD3D_Server.ini I start this new thread, so it don´t go under the surface in another thread Sorry for my english and i hope it will help someone. |
|||
Reputation: +4 - bobdinro [+1] , bradsbadluck [+1] , ocostel [+1] , pasha.manah [+1] | |||
12-02-2019, 20:02 PM,
Post: #2
|
|||
|
|||
RE: ODIS newer than 4.1.4 with clone VAS5054 (Solution)
hi, and thank you for this solution. i will try it and report back with my findings. at the moment i am using pdu api 0.23 with 5.0.4 and working ok. will see how this ini file edit turns out.
|
|||
16-02-2019, 19:04 PM,
Post: #3
|
|||
|
|||
RE: ODIS newer than 4.1.4 with clone VAS5054 (Solution)
That is same problem I have with my vas5054a ...
|
|||
18-02-2019, 22:33 PM,
Post: #4
|
|||
|
|||
RE: ODIS newer than 4.1.4 with clone VAS5054 (Solution)
I have odis 4.2.3/ odis 7.2.2 how can i connect them to passthru . Vcm ii /vcx nano
|
|||
13-03-2019, 17:08 PM,
Post: #5
|
|||
|
|||
RE: ODIS newer than 4.1.4 with clone VAS5054 (Solution)
Thanks for sharing your solution. It's helpful for me to install ODIS 5.0.6 with clone VAS5054.
|
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content