Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Precautions for original Peugeot Planet Interface
24-02-2019, 07:03 AM,
Post: #1
|
|||
|
|||
Precautions for original Peugeot Planet Interface
I'm about to receive an original PPI interface,
are there any precautions before launching the diagbox executed with a clone interface? I do not want to risk locking the interface. with this interface can I also run citroen? Thanks in advance |
|||
24-02-2019, 12:54 PM,
Post: #2
|
|||
|
|||
RE: Precautions for original Peugeot Planet Interface
I'm about to receive an original PPI interface,
are there any precautions before launching the diagbox executed with a clone interface? I do not want to risk locking the interface. with this interface can I also run citroen? the VCI for the Diagbox, LEXIA 3 and Planet from Peugeot and Citroen are technically identical (9780Z5 or A1281Z). Only the order numbers are different. Many older VCI also work with the Diagbox - must be tried in each case. Simply connect - the appropriate software / firmware from the Diagbox is taken over - and can then be used. The original VCI basically works with any PSA software. Greeting Wolfgang |
|||
25-02-2019, 11:37 AM,
Post: #3
|
|||
|
|||
RE: Precautions for original Peugeot Planet Interface
this is 963830 A
|
|||
25-02-2019, 13:30 PM,
Post: #4
|
|||
|
|||
RE: Precautions for original Peugeot Planet Interface
Firmware version v4.0.4
better, do not update? |
|||
27-02-2019, 13:29 PM,
Post: #5
|
|||
|
|||
RE: Precautions for original Peugeot Planet Interface
I have used this interface for many years - no problem. I also worked on 9-ka - no problem. It is sewn normally and up and down.
|
|||
01-03-2019, 09:42 AM,
Post: #6
|
|||
|
|||
RE: Precautions for original Peugeot Planet Interface
so, can I upgrade to 4.3.4 quietly?
|
|||
01-03-2019, 14:00 PM,
(This post was last modified: 01-03-2019, 14:12 PM by leon163.)
Post: #7
|
|||
|
|||
RE: Precautions for original Peugeot Planet Interface
(01-03-2019, 09:42 AM)allpro Wrote: so, can I upgrade to 4.3.4 quietly? I switched, no problem. Photos of his former adapter, I laid out somewhere here. (01-03-2019, 09:42 AM)allpro Wrote: so, can I upgrade to 4.3.4 quietly? (01-03-2019, 09:42 AM)allpro Wrote: so, can I upgrade to 4.3.4 quietly? |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content