Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

Change VIN in CAS3+
13-03-2019, 20:49 PM, (This post was last modified: 13-03-2019, 22:18 PM by Clusters.)
Post: #1
XSMini  Change VIN in CAS3+
I need to change the VIN in CAS3 +.
I have a VVDI prog.
After reading I want to change the VIN in the BMW CAS3+ editor.
Do I have to count later checksum?
Do I just have to change the eeprom?
Is it safe to upload the changed VIN using VVDI pro
Quote this message in a reply
13-03-2019, 21:51 PM,
Post: #2
RE: Change VIN in CAS3+
VIN is just in the eeprom, the checksum does need to be correct otherwise the CAS will delete the VIN.
I don't know if CAS3 editor will edit and correct the checksum
Reputation: +1 - volavka [+1]
Quote this message in a reply
[+] 2 users say Thank You to PhilipM for this post
14-03-2019, 11:04 AM,
Post: #3
RE: Change VIN in CAS3+
VVDI prog is good programmer for CAS3+ , for changing VIN with CAS3 editor I believe it will do it, but if you hesitate to do it upload your dump I will do it for you.

If  I helped you press magic buttons  clapping
Reputation: +1 - volavka [+1]
Quote this message in a reply
[+] 1 user says Thank You to pepi for this post
14-03-2019, 17:07 PM,
Post: #4
RE: Change VIN in CAS3+
VIN has 17 characters and the last bit is the checksum, just add all 17 characters in HEX calculator and write 18th byte as a checksum.
Quote this message in a reply
[+] 1 user says Thank You to borysgo2 for this post
14-03-2019, 19:55 PM,
Post: #5
RE: Change VIN in CAS3+
Ok. I understand a little. Checksum can be seen even in the NCS.
My client changed the engine in e90 from Ecu and CAS.
Earlier there was N47 143hp and now there is N47 177hp.
I am using the key to this new set, but navigation in CIC still does not work.
I copied VO from FRM to CAS.
I always only read the CAS and never typed. That is why I'm scared or not going down during the recording.
I understand that I need to read only the eeprom and change the VIN together with chk.
Can I change it in the HEX editor and enter it into CAS?
Quote this message in a reply
15-03-2019, 00:50 AM,
Post: #6
RE: Change VIN in CAS3+
(14-03-2019, 19:55 PM)laso Wrote:  Ok. I understand a little. Checksum can be seen even in the NCS.

That is a check digit, 0-9 A-Z, the VIN checksum is hex, 00-FF.

What you should do is change the VIN (long 17 digit VIN with checksum) this will be near the middle of the file. You might also see the short VIN near the bottom in the User info field (update history)

The short VIN is not used for any VIN comparison, only the full VIN.

You should also blank the milage (set to 100kms for example).
When the VIN in the dash and CAS match, the mileage will sync to the highest value, so you might see the mileage increase and then need to fix in the dash and CAS.

R270 will read the CAS eeprom and also allow you to quickly adjust CAS mileage, VIN would be done with a hex editor.

Each CAS data point has its own checksum, so you can just edit the VIN and VIN checksum, and write back to the CAS.
Reputation: +1 - volavka [+1]
Quote this message in a reply
[+] 3 users say Thank You to PhilipM for this post
15-03-2019, 11:29 AM,
Post: #7
RE: Change VIN in CAS3+
I have R270 but is chines clone.
I have VVDI Prog.
Quote this message in a reply
[+] 1 user says Thank You to laso for this post
15-03-2019, 13:24 PM, (This post was last modified: 15-03-2019, 13:41 PM by Clusters.)
Post: #8
RE: Change VIN in CAS3+
Have a look here..........


Attached Files
link.txt
File Type: .txt
Downloaded: 194 times
Size: 43 bytes

Quote this message in a reply
[+] 3 users say Thank You to Pifon07 for this post
16-03-2019, 12:29 PM, (This post was last modified: 16-03-2019, 20:42 PM by laso.)
Post: #9
XZBMW  RE: Change VIN in CAS3+
Thx for your link.
This is oryginal CAS3+.
This part I must copy to new CAS?
" 57 42 41 50 4e 31 31 30 31 30 41 32 35 35 38 31 37 e8"
How well I understood everything to "E8" to the checksum.
And how to calculate the sum if I do not have a oryginal CAS and i now only VIN number.


Link to my CAS

can someone check my calculations?
For VIN WBAWL1C57AP491915 checksum will be F6? I think well


Attached Files
link.txt
File Type: .txt
Downloaded: 47 times
Size: 68 bytes

Quote this message in a reply
02-03-2023, 20:28 PM,
Post: #10
RE: Change VIN in CAS3+
(16-03-2019, 12:29 PM)laso Wrote:  Thx for your link.
This is oryginal CAS3+.
This part I must copy to new CAS?
" 57 42 41 50 4e 31 31 30 31 30 41 32 35 35 38 31 37 e8"
How well I understood everything to "E8" to the checksum.
And how to calculate the sum if I do not have a oryginal CAS and i now only VIN number.


Link to my CAS

can someone check my calculations?
For VIN WBAWL1C57AP491915 checksum will be F6? I think well

Hi for your VIN WBAWL1C57AP491915

checksum  is : 2B

hex : 57 42 41 57 4C 31 43 35 37 41 50 34 39 31 39 31 35 2B
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  cas3 - msd80 isn bboctavian 6 235 Yesterday, 07:06 AM
Last Post: DSESET86
ZVW Solved ✔ EDC17CP20 need to change the power class perhan 3 140 22-03-2024, 12:11 PM
Last Post: perhan
XSMini Solved ✔ Problem Mini Cas3+ akl samirfe 4 134 21-03-2024, 15:01 PM
Last Post: samirfe
  Solved ✔ Cas2 up cas3+ problem johann74270 1 69 19-03-2024, 23:51 PM
Last Post: johann74270
XZBMW BMW CAS2 to CAS3 Immo Data Transfer Puntt 1 166 19-03-2024, 20:48 PM
Last Post: johann74270
  Flash file for cas3+ bmw 523i e60 2008 Akd@1975 1 85 17-03-2024, 11:47 AM
Last Post: Gabriel87
XZBMW CAS2 to CAS3+ johann74270 5 231 14-03-2024, 22:05 PM
Last Post: johann74270
  cas3 9389115 downgrade fail - vvdi keytoolplus motorsoft 2 115 14-03-2024, 10:08 AM
Last Post: sixcode
ILandRover Solved ✔ discovery 3 bcm vin change vaidisvaidis 5 205 12-03-2024, 15:10 PM
Last Post: vaidisvaidis
  Cas3+ editor by Bahram Akhundov - Software are FREE foxportal 1 429 10-03-2024, 11:39 AM
Last Post: BmwMerc

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content