Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Solved ✔ Nissan March Programming failure
30-05-2019, 11:11 AM,
(This post was last modified: 30-05-2019, 14:37 PM by Clusters.)
Post: #1
|
|||
|
|||
Nissan March Programming failure
Hello.,
need help here . Got this Nissan March 2010 with smart key. It got a huge spark to the extent that ECU and BCM got hardware faults beyond repair. I then imported BCM and ECU from japan..they got the parts from a 2010 nissan March . the only difference was BCM part number..it had a slight difference. I tried to program the key using x 100 pro but it says "program failure" i then read RL76 in the BCM to precode the key direct in the BCM using Tango. After writing the file back, the immo security light stays ON without blinking when the car is powered ON. it cranks but the engine cannot start. newECU and BCM part numbers: ECU: A56-E39 T1M 0X13 BCM: 284BB11HH2A LOT NO: 1509 E11 116RI - 000182 old ECU and BCM part numbers: ECU: A56-E39 T5X 1805 BCM:284B11HJ2A LOT NO: 1727 E11 116R1 - 000182 ECU eeproms: 95640 BCM eeproms: RL76 my head is now empty on what to do next how do i deal with this Regards. |
|||
30-05-2019, 13:54 PM,
Post: #2
|
|||
|
|||
RE: Nissan March Programming failure
solved...
I made key by tango.. I did not use precoded keys I added a key. there were 2 keys in the dump I made key 3 and the car has started . Its like a press start and happily drive Thanks Team. I now know some more than before because of you good people here! you may close this case |
|||
Reputation: +1 - dabaca [+1] | |||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content