Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Solved ✔ lancer 2000 dash dump need
16-07-2019, 00:53 AM,
(This post was last modified: 16-07-2019, 03:11 AM by Clusters.)
Post: #1
|
|||
|
|||
lancer 2000 dash dump need
hi all,
I need a dash dump for Mitsubishi Lancer 2000, Yazaki odo Odo chip - AD09952G no idea which type need to select on digiprog 3, I tried 93c56, and 93c86 on digiprog 3. But not reading correct mileage. Could someone please share a dump with 170,xxxkm for me. Cheers! |
|||
16-07-2019, 01:51 AM,
(This post was last modified: 16-07-2019, 01:57 AM by Clusters.)
Post: #2
|
|||
|
|||
RE: lancer 2000 dash dump need
That dash should have 93c46 and you should unsolder it.
If someone took the time to help you, the least you can do is take a few seconds and press two buttons!
Thanks + reputation. |
|||
16-07-2019, 01:58 AM,
Post: #3
|
|||
|
|||
RE: lancer 2000 dash dump need
|
|||
16-07-2019, 02:03 AM,
Post: #4
|
|||
|
|||
RE: lancer 2000 dash dump need
You can try this dump.....
Flip the board over and see if Pin 3 & Pin 4 are joined, if they are cut the trace then resolder after programming. |