Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
CAS3 DOWNGRADE cgdi SUCCESFUL
06-08-2019, 20:29 PM,
Post: #1
|
|||
|
|||
CAS3 DOWNGRADE cgdi SUCCESFUL
|
|||
06-08-2019, 21:12 PM,
Post: #2
|
|||
|
|||
RE: CAS3 DOWNGRADE cgdi SUCCESFUL
can you explain procedure?thanks in advance
|
|||
06-08-2019, 21:44 PM,
Post: #3
|
|||
|
|||
RE: CAS3 DOWNGRADE cgdi SUCCESFUL
the procedure is so you can see in the video the most important voltage I set to 14.03 volt it was my second attempt the first time I did without a power supply and I detained cas fortunately I had a backup eprom and flash. After that you do as in the movie when the program tells you to remove the key, pull it out and just wait and must do the downgrade.
|
|||
07-08-2019, 21:34 PM,
Post: #4
|
|||
|
|||
RE: CAS3 DOWNGRADE cgdi SUCCESFUL
i have personaly cgdi , have bench which are powered from old toshiba laptop power charger which gives 15,1V never successed to downgrade 656 only old ISTAP , i have also lab power supply which i can adjust but i dont believe that it will work if i put to 14,03 btw moments in video looks like fake when reach erasing flash state its stays on 0 too long.
|
|||
08-08-2019, 08:02 AM,
Post: #5
|
|||
|
|||
RE: CAS3 DOWNGRADE cgdi SUCCESFUL
Silva1337 I do not use a laboratory power supply or a computer power supply, only a specialized power supply which gives voltage as seen in the video and about 80 Amperes under the ist P, for this I do not do it on the table but connected everything in the car. buddy, back up your eprom and flash and you can go ahead and try if you don't do it, upload ori eprom flesh and get back on your feet. this is not a fiction but a reality.
|
|||
08-08-2019, 15:09 PM,
Post: #6
|
|||
|
|||
RE: CAS3 DOWNGRADE cgdi SUCCESFUL
I just writed my own experience with it, nobody talks about advices how to backup cas, and its no matter how many amp consumption on table 2-3A my power supplies are enough to power these actions.
|
|||
08-08-2019, 18:17 PM,
Post: #7
|
|||
|
|||
RE: CAS3 DOWNGRADE cgdi SUCCESFUL
so since you know better and have experienced your negative results, I am very sorry. u me in the movie you have shown that went cas3 soft 9395656. best regards
|
|||
09-08-2019, 20:19 PM,
Post: #8
|
|||
|
|||
RE: CAS3 DOWNGRADE cgdi SUCCESFUL
It sounds like you really want us to watch the video
|
|||
10-08-2019, 07:17 AM,
Post: #9
|
|||
|
|||
RE: CAS3 DOWNGRADE cgdi SUCCESFUL
you can watch and poster your will
|
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
cas3 - msd80 isn | bboctavian | 6 | 237 |
Yesterday, 07:06 AM Last Post: DSESET86 |
|
CGDI BMW Keytool Feedback | ROD-BENDERS | 71 | 28,424 |
24-03-2024, 21:11 PM Last Post: Cerhio |
|
Solved ✔ Problem Mini Cas3+ akl | samirfe | 4 | 135 |
21-03-2024, 15:01 PM Last Post: samirfe |
|
Solved ✔ Cas2 up cas3+ problem | johann74270 | 1 | 71 |
19-03-2024, 23:51 PM Last Post: johann74270 |
|
BMW CAS2 to CAS3 Immo Data Transfer | Puntt | 1 | 168 |
19-03-2024, 20:48 PM Last Post: johann74270 |
|
Flash file for cas3+ bmw 523i e60 2008 | Akd@1975 | 1 | 85 |
17-03-2024, 11:47 AM Last Post: Gabriel87 |
|
CAS2 to CAS3+ | johann74270 | 5 | 233 |
14-03-2024, 22:05 PM Last Post: johann74270 |
|
cas3 9389115 downgrade fail - vvdi keytoolplus | motorsoft | 2 | 115 |
14-03-2024, 10:08 AM Last Post: sixcode |
|
Cas3+ editor by Bahram Akhundov - Software are FREE | foxportal | 1 | 429 |
10-03-2024, 11:39 AM Last Post: BmwMerc |
|
CAS3 (black) elv off | boweld11 | 5 | 245 |
05-03-2024, 17:57 PM Last Post: perhan |
Users browsing this thread:
2 Guest(s)
2 Guest(s)
Return to TopReturn to Content