[labik]

I have mercedes w212 - ECU delphi 3.10 with oryginal mileage 269888 km. 
In Dash and EZS km is 26988. 
After command "Teach-in process after replacment of component "diesel particitulate filter""  mileage in ECU is +200.000 km and shows 469888 km. 
Please correction to 269888.

[M83]

Here you are, report the result

[labik]

After writing this file in DPF on the table show 0 km.
Unfortunately "Fill level of DPF" is 400%
Afret connect ECU to the car and command "Teach-in process after replacment of component "diesel particitulate filter"" mileage in ECU back to 469888 km. Where is he reading from mileage ? Dash and EZS stil 269888km.

[M83]

It's very weird

[labik]

I tried again.
It`s the same. On the table is 0 km, after connect to car mileage back to 469888. Other moules : EZS, IC, BSN show correct mileage 269888. 
What wrong ??
send foto

[labik]

News.
After writing this file in DPF on the table show 0 km.
Unfortunately "Fill level of DPF" is 400%
Afrer command "Teach-in process after replacment of component "diesel particitulate filter"" mileage in ECU back to 469888 km. Without connect ECU to the car !!!
So somewhere else is saved mileage in ECU !

[jomberykaso]

80 2B 07 = 469.888 kms
7E 2B 07 = 469.886 kms

40 1E 04 = 269.888 kms

[labik]

Still the same problem. I changed 6 records 40 1E 04 and first connect - show 0 km and 400 % - Afrer command "Teach-in process after replacment of component "diesel particitulate filter"" mileage in ECU back to 469888 km. 

ECU not connected to the car.

[labik]

I back from holyday.
I act with the ECU.
Eeprom writing to other ECU and in the ECU show mileage 469888 km.
Eeprom from second ECU writing to the first ECU and show mileage form second ECU.

My conclusion.
Mileage is saved more than 6 records.
There is also a stored somewhere counter Total regeneration of DPF - in foto - value 40, and Main odometer reading - value 99998 km.
This values they move on from eeprom for other ECU.

Who will correct this eeprom correctly?