Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
[Req] Parametrization / calibration XML 4G8907468K Audi A6 C7
14-02-2022, 12:51 PM,
Post: #1
|
|||
|
|||
[Req] Parametrization / calibration XML 4G8907468K Audi A6 C7
Some can help with a calibration file.
I am looking for a parameter file for gateway with the number 4G8907468K for Audi a6 c7. Via online when replacing the gateway block, the parameters file did not load. Thanks in advance |
|||
15-02-2022, 06:28 AM,
Post: #2
|
|||
|
|||
RE: [Req] Parametrization / calibration XML 4G8907468K Audi A6 C7
For general it is very hard to find. If you have online access, to get a solution you can try a online software update. I don’t have a Service bulletin ready for it, but K must have firmware 0110 as in the flash data there is firmware 0113.
General SVM Update Codes at Audi for Gateway is 19A001,19A002 and try up till 19A008 or till it says unknown code. Hold file ready to place in Odis datflash folder, but don’t place it. If svm Code is not suitable for the gateway it will do nothing and tells you, that this code is not for the ecu. When you don’t place the flash file in datflash it tells you which file he wants and there you can see which file he wants to flash. When 0113 the place it in datflash folder and start flash. When it works, they put parameters at the end. After that don’t close Odis, and don’t press anything, go directly in C:\Program Files (x86)\Offboard_Diagnostic_Information_System_Service\configuration\org.eclipse.osgi\bundles\114\data\dms2\ or C:\ProgramData\Offboard_Diagnostic_Information_System_Service\configuration\org.eclipse.osgi\bundles\114\data\dms2\ and there will be a xml file. Save this one and you also have parameters for next use on other car. Now you can press through till the end. If my answer helped to fix anything, then don't forget to give me some rep please!
|
|||
15-02-2022, 13:16 PM,
(This post was last modified: 15-02-2022, 13:28 PM by SergeusRUS.)
Post: #3
|
|||
|
|||
RE: [Req] Parametrization / calibration XML 4G8907468K Audi A6 C7
Yes, Gateway 4G8907468K has software with the number 0110. I tried with SVM code XCHG19A001. I will try with other codes. Thanks for the information.
|
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
2019 Audi A1 - Pre Sense Drive train fault - ABS Coding | rehatflogs | 0 | 8 |
1 hour ago Last Post: rehatflogs |
|
Audi A5 BCM 2 strange issue | CodeDoc | 2 | 25 |
3 hours ago Last Post: macintosh222 |
|
parameters of the steering rack Audi A6C8 4N0909144E from RS | VAGPRODRIVE | 1 | 230 |
09-05-2024, 13:19 PM Last Post: Artem2287096 |
|
calibration files ( sourced ) | simo2k | 0 | 81 |
07-05-2024, 15:57 PM Last Post: simo2k |
|
Audi A6 C8 Matrix LED 8G4 retrofit coding | Jonas225 | 4 | 396 |
07-05-2024, 11:50 AM Last Post: slimshouki |
|
Audi A8 4e flash file | Partizaniukas | 3 | 75 |
06-05-2024, 17:34 PM Last Post: Partizaniukas |
|
HELP... Audi A4 B8.5 reverse camera retrofit | keeseng89 | 0 | 36 |
06-05-2024, 03:21 AM Last Post: keeseng89 |
|
Programming Audi Area View | rocdeng | 19 | 1,043 |
30-04-2024, 02:30 AM Last Post: lykan |
|
Audi a3 8v update | on313no | 9 | 230 |
29-04-2024, 18:25 PM Last Post: on313no |
|
Audi A5 possible retrofit rear camera? | tigre | 5 | 122 |
28-04-2024, 13:04 PM Last Post: tigre |
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content